Wegener Communications 562 manual Menu Navigation using Push-buttons

Page 24

Operation

Figure 3.2: OSD Main Menu

Push-buttons

Use the arrow buttons and Enter on the front panel to navigate and edit the fields on LCD and OSD menus. Any of the push buttons activate OSD and LCD. The arrow buttons are used to navigate through menus and to either change or display items to set desired options for the IRD. The Enter button is generally used to select menu items on LCD and OSD menus. Selectable fields allow you to change the whole parameter from pre-determined options. Editable fields allow you to change each digit of the parameter. Once a field is updated, you must select Activate and Exit on the submenu and then press Enter to update the value of the field. Before pressing Enter, you may go back to any field and correct it prior to acceptance. The left arrow button usually steps back a menu.

Table 3.1: Menu Navigation using Push-buttons

	Button		Actions

		Main Menu	Submenu	Edit Mode
		Main Menu	Submenu	Edit Mode

	Enter	selects submenu or	goes to editable field	accepts changes
		drop-down list

	right arrow	no action	no action	moves cursor to right

	left arrow	exits OSD	goes to previous menu	moves cursor to left or
			level	abandon changes

	up arrow	goes to next or	goes to next or previous	increases value of selected
		previous menu item	menu item	item

	down arrow	goes to next or	goes to next or previous	decreases value of selected
		previous menu item	menu item	item

LED

Upon power up, the IRD initializes all system components and supplies an operational status. A steady Green LED indicates that it is locked on a carrier and is capable of producing output (Audio/Video/Data).

In case of problems, the LED flashes Red for alarm conditions or Amber for warning conditions. In general, alarms indicate that the unit cannot produce output, while Warnings

14

800092-01 Rev. A

www.wegener.com

Image 24

Contents IPump 800092-01 Rev. a First Edition July Wegener Communications, IncFCC Part 15B Class A, UL/C-UL1950 3rd EN5502498 Table of Contents Controlling and Monitoring Erminal D Iagterm C Ommands This page intentionally left blank 800092-01 Rev. a List of Tables This page intentionally left blank 800092-01 Rev. a List of Figures 34 iPump 562 OSD Display Current Warnings General Information Manual OverviewProduct Overview Digital Media SeverIPump 562 Product Specifications Features and OptionsCompel Network Con- trol Rear PanelConnections ExternalInput/Output InterfacesPdif Digital Audio Connector Input/Output Description Hdmi Digital Audio/Video Connector Input/Output DescriptionConnector Input/Output Description External Input/Output InterfacesRF Characteristics IPump 562 RF CharacteristicsTechnical Specifica- tions Video Decoder IPump 562 Video DecoderComposite Video Output IPump 562 Composite Video OutputComponent Video Output IPump 562 Component Video Output Audio DecoderUnbalanced Audio Output IPump 562 Unbalanced Audio OutputLNB DC Power RF Port 1 only AC PowerSerial Port Local Hard Disk Driver HDDSafety Summary Physical Characteristics14 iPump 562 Physical Characteristics Physical CharacteristicsInstallation PrecautionsUnpacking and Inspection Location and MountingDesktop Installation Circuit OverloadingReliable Earthing Rack MountingFront Panel Controls Indicators OperationControlling and Monitoring Menu Navigation using Push-buttons Push-buttonsDiagterm Terminal Commands Mode LED Status ConditionAlarm NormalNormal Functions CompelSystem ControlCarrier Settings screen Tune to a carrierCurrent Channel screen Configure LNB options LNB Setup screenChannel Information Options Monitor Signal Quality LNB configuration optionsSignal Quality Setup screen IPump 562 OSD Signal Quality Setup Screen Indicator Threshold screenIndicator Threshold screen options Signal Strength Meter screenSubtitling Setup screen Subtitling Setup screen options Configure the Advanced Setup screenUnit for Operation11 iPump 562 OSD Advanced Setup Unit Setup screenSet Decoder Options Video Decoder OptionsSetup Audio Audio Output OptionsSelect Activate Settings Set LAN-based Decode optionsLAN Decode Options Set LAN IP Networking options10 Networking Configuration Settings Set Terminal options11 Terminal Options Set Printer OptionsOption Possible values Console Baud-rate 12 User Relay Setup Options Set User RelaySet Date and Time information Option Possible values User Relay On/Off13 Date and Time Information Settings Switch Application to different software versionSet Unit Label Yes / NoMonitor Status Information Unit Status screenSignal Quality screen Current Quality screenHistory This Setting screen Signal Quality screenElapsed Times screen Query Network HistoryDisplay LAN IP Network information Find Software Version information29 iPump 562 OSD Version Info Clear Statistics used for diagnosisView Alarms/Warnings Play out play lists of media files32 iPump 562 OSD Main Menu 34 iPump 562 OSD Display Current Warnings This page intentionally left blank 800092-01 Rev. a Perms/Temps/Searching & Settings Settings Parameters for the iPumpSearch Functions Settings Table or Search Table Signal Quality MonitoringIPump 562 Settings Groups Signal Quality Information Frequency TaggingGeneral Rules Parameter Description ModulationThis page intentionally left blank 800092-01 Rev. a Customer Service WarrantyTechnical Support Customer Service Appendix 1 Terminal Diagterm Commands Apx 1.1 Diagterm Group CommandsTable Apx 1.1 Diagterm Group Commands Apx 1.2 Diagterm Individual Commands Table Apx 1.2 Diagterm Individual Commands 800092-01 Rev. a Appendix 2 Menu Tree Main Apx 3.1 Return Materials Authorization Request Form Mail service@wegener.com Fax 678Appendix 3 RMA Request Form This page intentionally left blank 800092-01 Rev. a Index NumericsPdif , 4 search