Wegener Communications 562 Tune to a carrier, Carrier Settings screen, Current Channel screen

Page 27

Tune to a carrier

Unity 552 User’s Manual

Carrier Settings screen

Use following steps to display Carrier Settings screen on the OSD menu:

1.Press any push-button on the front-panel to display the Main Menu.

2.Press the down arrow button to select Carrier Settings.

3.Press Enter.

4.View the details as shown in Figure 3.4.

Figure 3.4: iPump 562 OSD Carrier Settings Screen

Notes:

The Status shall be displayed as Tracking OK if the unit is tuned to a carrier.

Valid values for DVB-S2 are 0.35, 0.25 and 0.20.

The LNB DC Power may be turned on or off.

The SNR Margin Warning may be set with a desired threshold value in dB.

Current Channel screen

Use following steps to display Current Channel screen on the OSD menu:

1.From the Carrier Settings screen, press the down arrow button to select Current Channel.

2.Press Enter to display the Current Channel screen shown in Figure 3.5.

3.To navigate the screen, use the down arrow and Enter buttons to select an option. When the corresponding value of that option on the left is selected, use up or down buttons to set to the desired setting. Press Enter when done. Move to the next option using up or down button or left arrow to exit to the previous menu level.

www.wegener.com

800092-01 Rev. A

17

Image 27

Contents IPump 800092-01 Rev. a First Edition July Wegener Communications, IncFCC Part 15B Class A, UL/C-UL1950 3rd EN5502498 Table of Contents Controlling and Monitoring Erminal D Iagterm C Ommands This page intentionally left blank 800092-01 Rev. a List of Tables This page intentionally left blank 800092-01 Rev. a List of Figures 34 iPump 562 OSD Display Current Warnings Digital Media Sever General InformationManual Overview Product OverviewRear Panel IPump 562 Product SpecificationsFeatures and Options Compel Network Con- trolInterfaces ConnectionsExternal Input/OutputExternal Input/Output Interfaces Pdif Digital Audio Connector Input/Output DescriptionHdmi Digital Audio/Video Connector Input/Output Description Connector Input/Output DescriptionRF Characteristics IPump 562 RF CharacteristicsTechnical Specifica- tions IPump 562 Video Decoder Video DecoderComposite Video Output IPump 562 Composite Video OutputComponent Video Output IPump 562 Unbalanced Audio Output IPump 562 Component Video OutputAudio Decoder Unbalanced Audio OutputLocal Hard Disk Driver HDD LNB DC Power RF Port 1 onlyAC Power Serial PortPhysical Characteristics Safety SummaryPhysical Characteristics 14 iPump 562 Physical CharacteristicsLocation and Mounting InstallationPrecautions Unpacking and InspectionRack Mounting Desktop InstallationCircuit Overloading Reliable EarthingFront Panel Controls Indicators OperationControlling and Monitoring Push-buttons Menu Navigation using Push-buttonsNormal Diagterm Terminal CommandsMode LED Status Condition AlarmControl Normal FunctionsCompel SystemCarrier Settings screen Tune to a carrierCurrent Channel screen Configure LNB options LNB Setup screenChannel Information Options Monitor Signal Quality LNB configuration optionsSignal Quality Setup screen Indicator Threshold screen IPump 562 OSD Signal Quality Setup ScreenIndicator Threshold screen options Signal Strength Meter screenSubtitling Setup screen Operation Subtitling Setup screen optionsConfigure the Advanced Setup screen Unit forUnit Setup screen 11 iPump 562 OSD Advanced SetupVideo Decoder Options Set Decoder OptionsAudio Output Options Setup AudioSet LAN IP Networking options Select Activate SettingsSet LAN-based Decode options LAN Decode OptionsSet Terminal options 10 Networking Configuration Settings11 Terminal Options Set Printer OptionsOption Possible values Console Baud-rate Option Possible values User Relay On/Off 12 User Relay Setup OptionsSet User Relay Set Date and Time informationYes / No 13 Date and Time Information SettingsSwitch Application to different software version Set Unit LabelUnit Status screen Monitor Status InformationCurrent Quality screen Signal Quality screenSignal Quality screen History This Setting screenQuery Network History Elapsed Times screenFind Software Version information Display LAN IP Network informationClear Statistics used for diagnosis 29 iPump 562 OSD Version InfoPlay out play lists of media files View Alarms/Warnings32 iPump 562 OSD Main Menu 34 iPump 562 OSD Display Current Warnings This page intentionally left blank 800092-01 Rev. a Perms/Temps/Searching & Settings Settings Parameters for the iPumpSearch Functions Settings Table or Search Table Signal Quality MonitoringIPump 562 Settings Groups Parameter Description Modulation Signal Quality InformationFrequency Tagging General RulesThis page intentionally left blank 800092-01 Rev. a Customer Service WarrantyTechnical Support Customer Service Appendix 1 Terminal Diagterm Commands Apx 1.1 Diagterm Group CommandsTable Apx 1.1 Diagterm Group Commands Apx 1.2 Diagterm Individual Commands Table Apx 1.2 Diagterm Individual Commands 800092-01 Rev. a Appendix 2 Menu Tree Main Apx 3.1 Return Materials Authorization Request Form Mail service@wegener.com Fax 678Appendix 3 RMA Request Form This page intentionally left blank 800092-01 Rev. a Numerics IndexPdif , 4 search