Wegener Communications 562 manual Table Apx 1.2 Diagterm Individual Commands

Unity 552 User’s Manual

Following is a list of commands along with synopsis. A general syntax for the group command is:

Table Apx 1.2: Diagterm Individual Commands

	Command	Synopsis
	abortrec	Tune to Last Successful (S) or Last commanded (C)
	abort	Abort Temporary Insert
	adds	Add Location Settings
	ap	Audio Program
	ap2	Audio Program 2
	audatten	Audio Attenuation
	audroute	Set Audio Routing (S-Stereo; 1 or 2 Left/Right; R-Reverse
		Stereo)
	contentaccess	Set access level for content on HDD (Read-only or Full)
	dels	Delete Location Settings
	errors	Set Alarm Threshold
	ifconfig	Display current ETHERNET device(s) configuration
	lnbpwr	Turn LNB Power ON/OFF
	lnbselect	Set LNB Mode UNIV/ASTRA or STD/LO
	margin	Set margin offset (Range: 1.0 - 10.5 dB)
	movep	Move Preset entry (source and destination entry #'s)
	permch	Set perm settings from search table (Position: 1-48)
	perm	Set Perm Settings
	port	Select RBDS port
	re	Turn solid-state Relays On or Off
	savep	Save current Settings to a Preset entry
	Service	Enable or Disable named service
	setlnb	Set LNB LO Frequency
	settimeout	Set Timeout (Source #2-5 and time)
	set	Set Individual Carrier Parameters
	snr	Set SNR margin offset
www.wegener.com		800092-01 Rev. A	49