Wegener Communications 562 Configure LNB options, Channel Information Options, LNB Setup screen

Page 28

Operation

Configure LNB options

Figure 3.5: iPump 562 OSD Current Channel Screen

Use the Current Channel screen to set or display the channel information.

Table 3.3: Channel Information Options

Option	Possible values	Comments

Preset	Perm, Command, Last	Only Perm option allows other options to be set.
	Success or Current	The channel set using the Compel Command.

Modulation	QPSK/S2QPSK/S28PSK	-

FEC Ratio	1/2, 2/3, ¾, 5/6, 7/8	-

Frequency

Data Rate

Symbol Rate		Automatically calculated and displayed only

Program		Set to the desired program # in the carrier

Tag Site		The tag #15 is a special value

LNB Setup screen

Use following steps to display LNB Setup screen on the OSD menu:

1.Press any push-button on the front-panel to display the Main Menu.

2.Press the down arrow button to select Carrier Settings.

3.Press Enter.

4.Press the down arrow button to select LNB Setup.

5.Press Enter. Figure 3.6 details the LNB Setup screen.

6.To navigate the screen, use down arrow and Enter to select an option. When the corresponding value of that option on the left is selected, use up or down buttons to set to the desired setting. Press Enter when done. Move to the next option using up or down button or left arrow to exit to the previous menu level.

18

800092-01 Rev. A

www.wegener.com

Image 28

Contents IPump Wegener Communications, Inc 800092-01 Rev. a First Edition JulyFCC Part 15B Class A, UL/C-UL1950 3rd EN5502498 Table of Contents Controlling and Monitoring Erminal D Iagterm C Ommands This page intentionally left blank 800092-01 Rev. a List of Tables This page intentionally left blank 800092-01 Rev. a List of Figures 34 iPump 562 OSD Display Current Warnings General Information Manual OverviewProduct Overview Digital Media SeverIPump 562 Product Specifications Features and OptionsCompel Network Con- trol Rear PanelConnections ExternalInput/Output InterfacesPdif Digital Audio Connector Input/Output Description Hdmi Digital Audio/Video Connector Input/Output DescriptionConnector Input/Output Description External Input/Output InterfacesIPump 562 RF Characteristics RF CharacteristicsTechnical Specifica- tions Video Decoder IPump 562 Video DecoderIPump 562 Composite Video Output Composite Video OutputComponent Video Output IPump 562 Component Video Output Audio DecoderUnbalanced Audio Output IPump 562 Unbalanced Audio OutputLNB DC Power RF Port 1 only AC PowerSerial Port Local Hard Disk Driver HDDSafety Summary Physical Characteristics14 iPump 562 Physical Characteristics Physical CharacteristicsInstallation PrecautionsUnpacking and Inspection Location and MountingDesktop Installation Circuit OverloadingReliable Earthing Rack MountingOperation Front Panel Controls IndicatorsControlling and Monitoring Menu Navigation using Push-buttons Push-buttonsDiagterm Terminal Commands Mode LED Status ConditionAlarm NormalNormal Functions CompelSystem ControlTune to a carrier Carrier Settings screenCurrent Channel screen LNB Setup screen Configure LNB optionsChannel Information Options LNB configuration options Monitor Signal QualitySignal Quality Setup screen IPump 562 OSD Signal Quality Setup Screen Indicator Threshold screenSignal Strength Meter screen Indicator Threshold screen optionsSubtitling Setup screen Subtitling Setup screen options Configure the Advanced Setup screenUnit for Operation11 iPump 562 OSD Advanced Setup Unit Setup screenSet Decoder Options Video Decoder OptionsSetup Audio Audio Output OptionsSelect Activate Settings Set LAN-based Decode optionsLAN Decode Options Set LAN IP Networking options10 Networking Configuration Settings Set Terminal optionsSet Printer Options 11 Terminal OptionsOption Possible values Console Baud-rate 12 User Relay Setup Options Set User RelaySet Date and Time information Option Possible values User Relay On/Off13 Date and Time Information Settings Switch Application to different software versionSet Unit Label Yes / NoMonitor Status Information Unit Status screenSignal Quality screen Current Quality screenHistory This Setting screen Signal Quality screenElapsed Times screen Query Network HistoryDisplay LAN IP Network information Find Software Version information29 iPump 562 OSD Version Info Clear Statistics used for diagnosisView Alarms/Warnings Play out play lists of media files32 iPump 562 OSD Main Menu 34 iPump 562 OSD Display Current Warnings This page intentionally left blank 800092-01 Rev. a Settings Parameters for the iPump Perms/Temps/Searching & SettingsSearch Functions Signal Quality Monitoring Settings Table or Search TableIPump 562 Settings Groups Signal Quality Information Frequency TaggingGeneral Rules Parameter Description ModulationThis page intentionally left blank 800092-01 Rev. a Warranty Customer ServiceTechnical Support Customer Service Apx 1.1 Diagterm Group Commands Appendix 1 Terminal Diagterm CommandsTable Apx 1.1 Diagterm Group Commands Apx 1.2 Diagterm Individual Commands Table Apx 1.2 Diagterm Individual Commands 800092-01 Rev. a Appendix 2 Menu Tree Main Mail service@wegener.com Fax 678 Apx 3.1 Return Materials Authorization Request FormAppendix 3 RMA Request Form This page intentionally left blank 800092-01 Rev. a Index NumericsPdif , 4 search