Wegener Communications 562 manual Monitor Signal Quality, LNB configuration options

Page 29

Monitor

Signal

Quality

Unity 552 User’s Manual

Figure 3.6: iPump 562 OSD LNB Setup Screen

Use the LNB Setup screen to set and display the LNB configuration.

Table 3.4: LNB configuration options

Option	Possible values	Comments

LNB Type	Local Oscillator or Universal/ASTRA	Only Local Osc option allows
		other options to be set.

LO Type	Custom Freq., Std C-band, US Ku-	Only Custom Freq. option
	band, Euro Low Ku-band or Euro Hi	allows other options to be set.
	Ku-band

LO Custom Freq.

Signal Quality Setup screen

Use following steps to display Signal Quality Setup screen on the OSD menu:

1.Press any push-button on the front-panel to display the Main Menu.

2.Press the down arrow button to select Carrier Settings.

3.Press Enter.

4.Press the down arrow button to select Signal Quality Setup.

5.Press Enter to display the Signal Quality Setup screen shown in Figure 3.7.

www.wegener.com

800092-01 Rev. A

19

Image 29

Contents IPump FCC Part 15B Class A, UL/C-UL1950 3rd EN5502498 800092-01 Rev. a First Edition JulyWegener Communications, Inc Table of Contents Controlling and Monitoring Erminal D Iagterm C Ommands This page intentionally left blank 800092-01 Rev. a List of Tables This page intentionally left blank 800092-01 Rev. a List of Figures 34 iPump 562 OSD Display Current Warnings Manual Overview General InformationProduct Overview Digital Media SeverFeatures and Options IPump 562 Product SpecificationsCompel Network Con- trol Rear PanelExternal ConnectionsInput/Output InterfacesHdmi Digital Audio/Video Connector Input/Output Description Pdif Digital Audio Connector Input/Output DescriptionConnector Input/Output Description External Input/Output InterfacesTechnical Specifica- tions RF CharacteristicsIPump 562 RF Characteristics IPump 562 Video Decoder Video DecoderComponent Video Output Composite Video OutputIPump 562 Composite Video Output Audio Decoder IPump 562 Component Video OutputUnbalanced Audio Output IPump 562 Unbalanced Audio OutputAC Power LNB DC Power RF Port 1 onlySerial Port Local Hard Disk Driver HDDPhysical Characteristics Safety Summary14 iPump 562 Physical Characteristics Physical CharacteristicsPrecautions InstallationUnpacking and Inspection Location and MountingCircuit Overloading Desktop InstallationReliable Earthing Rack MountingControlling and Monitoring Front Panel Controls IndicatorsOperation Push-buttons Menu Navigation using Push-buttonsMode LED Status Condition Diagterm Terminal CommandsAlarm NormalCompel Normal FunctionsSystem ControlCurrent Channel screen Carrier Settings screenTune to a carrier Channel Information Options Configure LNB optionsLNB Setup screen Signal Quality Setup screen Monitor Signal QualityLNB configuration options Indicator Threshold screen IPump 562 OSD Signal Quality Setup ScreenSubtitling Setup screen Indicator Threshold screen optionsSignal Strength Meter screen Configure the Advanced Setup screen Subtitling Setup screen optionsUnit for OperationUnit Setup screen 11 iPump 562 OSD Advanced SetupVideo Decoder Options Set Decoder OptionsAudio Output Options Setup AudioSet LAN-based Decode options Select Activate SettingsLAN Decode Options Set LAN IP Networking optionsSet Terminal options 10 Networking Configuration SettingsOption Possible values Console Baud-rate 11 Terminal OptionsSet Printer Options Set User Relay 12 User Relay Setup OptionsSet Date and Time information Option Possible values User Relay On/OffSwitch Application to different software version 13 Date and Time Information SettingsSet Unit Label Yes / NoUnit Status screen Monitor Status InformationCurrent Quality screen Signal Quality screenSignal Quality screen History This Setting screenQuery Network History Elapsed Times screenFind Software Version information Display LAN IP Network informationClear Statistics used for diagnosis 29 iPump 562 OSD Version InfoPlay out play lists of media files View Alarms/Warnings32 iPump 562 OSD Main Menu 34 iPump 562 OSD Display Current Warnings This page intentionally left blank 800092-01 Rev. a Search Functions Perms/Temps/Searching & SettingsSettings Parameters for the iPump IPump 562 Settings Groups Settings Table or Search TableSignal Quality Monitoring Frequency Tagging Signal Quality InformationGeneral Rules Parameter Description ModulationThis page intentionally left blank 800092-01 Rev. a Technical Support Customer ServiceWarranty Customer Service Table Apx 1.1 Diagterm Group Commands Appendix 1 Terminal Diagterm CommandsApx 1.1 Diagterm Group Commands Apx 1.2 Diagterm Individual Commands Table Apx 1.2 Diagterm Individual Commands 800092-01 Rev. a Appendix 2 Menu Tree Main Appendix 3 RMA Request Form Apx 3.1 Return Materials Authorization Request FormMail service@wegener.com Fax 678 This page intentionally left blank 800092-01 Rev. a Numerics IndexPdif , 4 search