TOA Electronics C-RM500 Basic Setting Operations, S S W O R D, E R a T I O N M O D E

6.3. Basic Setting Operations

This section shows basic operating procedures for each setting item. Note, however, that the password setting differs from those explained here. Refer to p. 40 for the password setting procedure.

Step 1. Press the Menu key with a pointed object.

[When the password has been set]

The password entry screen is displayed.

MENU

P A S S W O R D

1-1.Enter the password (4 digits) using the numeric keypad.

(Example)

1 2 3 4

P A S S W O R D 1 2 3 4

1-2.Press the SET key.

If the password is correct, the menu screen appears.

SET

O P E R A T I O N M O D E

[When the password has not been set]

The menu screen appears.

O P E R A T I O N M O D E

Step 2. Tilt the joystick up or down to select the setting item.

Step 3. Press the SET key to confirm the setting item. The current setting contents (if not set, the factory-predetermined setting contents) are displayed at the lower part of the LCD screen. In this event, one character "1" of the setting contents flashes. (The flashing character differs depending on the content.)

(Example)

	UP
LEFT	RIGHT
	DOWN

SET

A U T O R E T U R N

A U T O R E T U R N

1 . O N

Flashes

Step 4. Tilt the joystick left or right to select the desired setting content.

Tip

Pressing the Clear key before Step 4 is completed will return the display to the screen last shown (in Step 2) before the SET key was pressed.

(Example)

UP

LEFT	RIGHT	A U T O	R E T U R N
		1 . O N	1 0 S E C
	DOWN

Step 5. Press the SET key to confirm the setting contents.

The display returns to the screen (in Step 2) to select the setting item.

SET

(Step. 2)

A U T O R E T U R N

Step 6. Repeat Steps 2 – 5 to continue to set other items.

Press the Menu key when returning to the normal screen after setting completion.

23