6.4.18. Function key programming
By simply pressing the function key, the camera image (camera number and position number) can be displayed on the monitor. It is also possible to control alarm contact switching and instruct the camera to perform multiple automatic operations.
Step 1. Press the Menu key to display the menu screen.
Step 2. Tilt the joystick up or down to select "FUNCTION KEY" and confirm the selection with the SET key. The settings is displayed on Line 2, and the unit switches to Function Key Entry Waiting mode.
Note that when the camera number or the position
number is not programmed in advance, the " 
" indication is displayed in place of the number.
Step 3. Tilt the joystick to the left or right to select the desired function key and confirm the setting with the SET key.
The flashing cursor moves to the camera number.
Step 4. Enter the camera number using the numeric keypad, and confirm it with the SET key.
Enter a number from 1 to 999.
The flashing cursor moves to the position number.
Step 5. Enter the position number with the numeric keypad. Enter a number from 1 to 255.
Tip
Entering "0" will switch the screen to
Step 6. Press the SET key to confirm the entered position number.
The procedure returns to Step 3, and the set contents are displayed on the LCD screen.
Step 7. Repeat Steps 3 – 6 to continue to set other Function keys.
Press the Clear key to return to the setting item display.
|
|
|
|
|
|
|
|
| Function key | |
F U N C T I O N K E Y | A | |||||||||
| (A – H) | |||||||||
| ||||||||||
C A M |
| P O S |
|
|
| |||||
|
|
|
|
|
|
|
|
| Position No. | |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Camera No. | |
|
|
|
|
|
|
|
|
| ||
F U N C T I O N K E Y | A |
| |
C A M | P O S |
|
|
3 | UP |
|
|
LEFT | RIGHT | SET | |
|
|
| |
| DOWN |
|
|
F U N C T I O N K E Y | A |
| |
C A M | P O S |
|
|
4 | (Example) |
|
|
1 | 5 | SET | |
|
|
| |
F U N C T I O N K E Y | A |
| |
C A M 1 5 | P O S |
|
|
5 | (Example) |
|
|
1 | 2 | 3 | |
|
|
| |
F U N C T I O N K E Y | A |
| |
C A M 1 5 P O S 1 2 3 |
|
| |
6 | SET |
|
|
|
|
| |
[Automatic operation settings]
After performing the settings in Steps 1 – 3 above, tilt the joystick up or down to select one of the following settings, then press the SET key to confirm it.
F U N C T I O N K E Y A A U T O P A N
AUTO PAN | Continues panning between 2 points set on the camera menu. |
AUTO TRACE | Repeats manual operations set on the camera menu. |
|
|
PRESET SEQUENCE | Plays back the positions stored in the camera in setting order. |
|
|
AUX2 (auxiliary2) | Makes or breaks the Combination camera's auxiliary contact output #2. |
|
|
[Deleting settings]
After pressing the Alarm Reset key, press the SET key.
37