Connecting to Your PC Using the
Cradle
1Insert end A of the USB cable to your PC’s USB port or USB hub.
2Connect end b of the USB cable to the cradle.
3Turn ON the recorder, then set the recorder in the cradle.
If “REMOTE” is displayed on recorder, it indicates proper connection.
..............................................................................................................................................................
Notes
4
Connection to
Your PC
•Never touch the contact points at the bottom of the cradle, as that may cause bad connection.
•With a PC connected, the recorder cannot be operated with the foot switch (RS25/26). When connecting
the recorder to a PC via the cradle, remove the foot switch. | 57 |