Avaya S8400 manual Setting locations if necessary, Type change locations and press Enter

Setting locations (if necessary)

Setting locations (if necessary)

After you set the daylight savings rules, you must set the locations for all media gateways (cabinets). It is possible to have media gateways in different time zones. Even though you set the date, time, and time zone through the Web interface on the media server, you also must set locations through SAT commands.

1.Type change locations and press Enter.

change locations				Page 1 of 5
			LOCATIONS
		ARS Prefix 1 Required For 10-Digit NANP Calls? y
Number	Name	Timezone	Daylight-Savings	Number Plan
		Offset	Rule	Area Code
1	Main	+ 00:00	0
2	CA	- 02:00	0
3		:
4		:
5		:
6		:
7		:
8		:
9		:
10		:
11		:

2.In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.

3.Type the information in the various fields for each media gateway.

Note:

In the Name field for location 1, call the media gateway (cabinet) Main. 4. Press Enter to effect the changes.

Installing and Configuring the Avaya S8400 Media Server February 2006 59