McIntosh MVP861 owner manual How to Operate the Remote Control

Page 15

How to Operate the Remote Control

How to Operate the Remote Control

The Remote Control is capable of performing both basic Operating Functions and Setup Options for the MVP861 Disc Player.

Notes: Refer to the “How to Operate” and “How to Operate Setup Mode” Sections of this manual for additional information using this Remote Control. The NTSC/PAL, PIC ADJ, SETUP, DIM, and POWER ON/OFF push- buttons will only send their commands to the MVP861 after the push-button is released.

Play

With a disc loaded, press the PLAY push-button to start the disc playing.

Stop

Press the STOP„ Push-button once to stop disc playback. Press PLAY and the disc will start playing again from the disc time where Stop was pressed. Press STOP„ twice for a complete stop and return to the beginning of a disc.

Numbered Push-buttons

Press 1 through 9 to directly access one of the first nine Disc Tracks/Chapters using the On-screen Icon. For track numbers greater than 10, press the +10 Push-button first and then required number. For example to access Disc Track/Chapter 23, press +10 twice and then 3.

Clear

Press the CLEAR Push-button to erase a selected track or incorrect setting.

Pause

Press the PAUSE Push-button to temporarily stop disc playback at any time. When a DVD is playing, each addi- tional time the PAUSE push-button is pressed, the player will proceed to the next Still Video Image.

Note: The Still Video Image step rate may be changed by

using the REV (Reverse) or FF (Fast Forward) Push-button.

Back and Next

 

 

Press the NEXT

 

Push-button to move forward or the

 

BACK

 

Push-button to move backward one chapter/

 

track at a time on the disc.

Return

Press the RTRN(Return) Push-button to return to the previ- ous setup menu.

Setup

Press the SETUP Push-button to access the Initial Setup Menu.

Subtitle

Press the SUBTITLE Push-button to access the Subtitle menu and the Subtitle icon will appear at the top of the screen.

Marker

While a disc is playing, use the MRKR(Marker) Push-but- ton to establish in memory up to five different starting points on a disc where you wish play to start.

Angle

If the DVD being played supports the Angle Feature, press the ANGLE Push-button to select the desired video picture angle.

Four Direction Arrows

Press an Arrow direction Push-button to move backward, forward, up or down through an on-screen menu.

Select

Press the SELECT Push-button to confirm and activate a setup option or options indicated by the on-screen icons.

Note: The SELECT push-button is also refered to as “Return” when working within the Setup Mode.

Top Menu

When a disc is loaded in the player, press the TOP MENU Push-button to access the main DVD Title menu (disc de- pendent).

Display/Time

Press the DISPlay/TIME Push-button to access various disc times, text information on SACD/CD and audio modes displayed on-screen (disc dependent).

Audio

Press the AUDIO Push-button to access various audio modes displayed on-screen (disc dependent).

REV and FF

Press a REV (Reverse) or FF (Fast Forward) Push- button to start moving rapidly through a chapter or track on a disc.

Note: Audio level is automatically muted during this operating mode with a DVD disc.

A-B Repeat

Press the A-B(Repeat) Push-button once to establish the starting point of the repeat loop and press the A-B(Repeat) Push-button a second time for the ending point, and that segment of a disc to be repeated continuously.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Audio Video Player Luokan 1 Laserlaite Klass 1 Laser Apparat Important Safety Instructions Please Take a Moment Customer ServiceTable of Contents Thank YouImportant Information and Connector Information Connector InformationImportant Information, con’t Performance Features Introduction and Performance FeaturesSide View of the MVP861 Dimensions MVP861 DimensionsFront View of the MVP861 Rear View of the MVP861Installation Optical Output Rear Panel ConnectionsHow to Connect Control, Analog and Digital Audio How to Connect Video and AC Power STANDBY/ON Front Panel Indicators, Push-Buttons and SwitchFront Panel Display Remote Control Push-Buttons How to Operate the Remote Control How to Operate the Setup Mode Setup and Default Settings Setup Mode Default Settings Dialog How to Set Disc LanguageDisc Menus SETUP, con’tHow to Set the OSD On Screen Display OSD LanguageWall Paper SETUP, con’t How to Set the Video TV AspectTV Type Video Out Still Mode How to Set the Video, con’tBlack Level Squeeze ModeProgressive Mode Audio Channel SETUP, con’t How to Set the AudioChannel Level Adjustments SETUP, con’t How to Set the Audio, con’t Digital Out Super Audio CDLpcm 44.1kHz/48kHz Bass Enhancer 2 Channel Rating Level How to Set the RatingsSETUP, con’t Password How to Set the Ratings, con’tSETUP, con’t How to Set the Other Setup Player ModeCaptions Compression Slide Show Auto Power ModeSETUP, con’t How to Play a DVD Disc How to Operate the MVP861Power On How to Load a DVD, Sacd or CD DiscHow to Play a Sacd Disc How to Play a CD DiscHow to Pause a Disc How to Operate the MVP861, con’t DVD-Audio Group Selection Access a Specific Time location on a DVDDVD-Video Direct Chapter Selection DVD-Audio Direct Track SelectionHow to Set and Activate Markers DVD-Video RepeatDVD-Audio Repeat Sacd or CD Repeat Disc A-B RepeatRandom Playback Figures 90 Audio Disc Program Playback ModeReset of Microprocessors MP3 Audio Playback MP3 Audio CD, Jpeg Photo CDs and Video CD PlaybackVideo CDs Jpeg Photo CDsVideo Settings How to Operate the MVP861, con’t Audio Specifications Video SpecificationsGeneral Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY
Top Page Image Contents