How to Operate the MVP861, con’t
Video Settings
A MVP861 option allows the adjustment of various video parameters, not unlike what can be adjusted on a TV/Moni- tor. These custom adjustments can be stored into one of five memory locations. To enter custom settings perform the following steps:
1.Press the PICADJ (Picture Adjustment)
Note: The STD (Standard) is the default setting for the various picture adjustments.
2. Press the Right directional
3.Press the SELECT
4. Press the Down directional
5. | Press the Right | directional | ||
| Picture Brightness Setting. | |||
6. | Use the Up | or Down | directional | |
| adjust the Brightness from a setting of 0 to +12. | |||
7. | Press the Right | directional | ||
| Picture Sharpness Setting. | |||
8. | Use the Up | or Down | directional | |
| adjust the Sharpness from a setting of | |||
9. | Press the Right | directional | ||
| Picture Hue (Tint) Setting. | |||
10. Use the Up | or Down | directional |
adjust the Hue from a setting of
Note: The Hue Setting is active for the Composite Video and
11. Press the SELECT
Note: The Gamma settings are for making fine adjustments to the Picture’s dynamic range from black (16) to white (235). Each of the Steps on the
12. | Press the Down | directional | |
| the Right | or Left | directional |
| a point (Step) on the Gamma curve. | ||
13. | Use the Up | or Down directional | |
| make fine adjustments. When the desired adjustments |
are complete press the SELECT Pushbutton to exit the Gamma settings and press the PICADJ
Note: The Picture Setting changes are stored in memory until new values are entered.
Figure 101
Figure 102
Figure 103
52