McIntosh MVP861 owner manual Black Level, Squeeze Mode

Page 25

SETUP, con’t

Note: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.

4.Return to the Video Setup Menu by pressing the Up directional Push-button.

5.Next continue to the BLACK LEVEL Settings. If no other changes are to be made in Setup Mode at this

time, exit by pressing the Down directional Push- button to select the EXIT SETUP menu choice fol- lowed by the SELECT Push-button and the MVP861 will return to normal operation.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

Black Level

The Black Level adjustment allows for changing the over- all light to dark video level range to match up with the Monitor/TV capabilities. To change from the default set- ting perform the following steps:

1. Press the SETUP Push-button on the supplied Remote Control to access the On-ScreenDisc Setup Menu. Then press the Right directional Push-button to se- lect the Video Setup Menu Icon Tab. Refer to figure 12 on page 22.

Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.

2. Use the Down directional Push-button followed by the SELECT Push-button on the Remote Control to se- lect the BLACK LEVEL Menu. Refer to figure 20.

3. To change from the default setting use the Up or Down directional Push-buttons followed by the SE- LECT Push-button.

Note: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.

4.Return to the Video Setup Menu by pressing the Up directional Push-button.

5.Next continue to the SQUEEZE MODE Settings. If no other changes are to be made in Setup Mode at this

time, exit by pressing the Down directional Push- button to select the EXIT SETUP menu choice fol- lowed by the SELECT Push-button and the MVP861 will return to normal operation.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

Squeeze Mode

There are two choices for viewing a Full Screen (4:3) DVD disc when the MVP861 is connected to a Wide Screen (16:9) Monitor/TV; full screen or center screen only. To

Figure 21

change from the default full screen setting perform the fol- lowing steps:

Note: The MVP861 needs to be in the Progressive Scan Mode and the Monitor/TV connected to the Component Video Outputs Jacks.

1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Disc Setup Menu.

Then press the Right directional Push-button to se- lect the Video Setup Menu Icon Tab. Refer to figure 12 on page 22.

Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.

2. Use the Down directional Push-button followed by the SELECT Push-button on the Remote Control to se- lect the SQUEEZE MODE Menu. Refer to figure 21.

3. To change from the default setting use the Up or Down directional Push-buttons followed by the SE- LECT Push-button.

Note: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.

4.Return to the Video Setup Menu by pressing the Up directional Push-button.

5.Next continue to the PROGRESSIVE MODE Settings.

If no other changes are to be made in Setup Mode at this time, exit by pressing the Down directional Push-button to select the EXIT SETUP menu choice followed by the SELECT Push-button and the MVP861 will return to normal operation.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Audio Video Player Luokan 1 Laserlaite Klass 1 Laser Apparat Important Safety Instructions Table of Contents Customer ServiceThank You Please Take a MomentConnector Information Important Information and Connector InformationImportant Information, con’t Performance Features Introduction and Performance FeaturesFront View of the MVP861 Dimensions MVP861 DimensionsRear View of the MVP861 Side View of the MVP861Installation Optical Output Rear Panel ConnectionsHow to Connect Control, Analog and Digital Audio How to Connect Video and AC Power STANDBY/ON Front Panel Indicators, Push-Buttons and SwitchFront Panel Display Remote Control Push-Buttons How to Operate the Remote Control How to Operate the Setup Mode Setup and Default Settings Setup Mode Default Settings Dialog How to Set Disc LanguageDisc Menus SETUP, con’tOSD Language How to Set the OSD On Screen DisplayWall Paper SETUP, con’t TV Aspect How to Set the VideoTV Type Video Out Still Mode How to Set the Video, con’tBlack Level Squeeze ModeProgressive Mode Audio Channel SETUP, con’t How to Set the AudioChannel Level Adjustments SETUP, con’t How to Set the Audio, con’t Digital Out Super Audio CDLpcm 44.1kHz/48kHz Bass Enhancer 2 Channel Rating Level How to Set the RatingsSETUP, con’t Password How to Set the Ratings, con’tSETUP, con’t Player Mode How to Set the Other SetupCaptions Compression Slide Show Auto Power ModeSETUP, con’t Power On How to Operate the MVP861How to Load a DVD, Sacd or CD Disc How to Play a DVD DiscHow to Play a CD Disc How to Play a Sacd DiscHow to Pause a Disc How to Operate the MVP861, con’t DVD-Video Direct Chapter Selection Access a Specific Time location on a DVDDVD-Audio Direct Track Selection DVD-Audio Group SelectionDVD-Video Repeat How to Set and Activate MarkersDVD-Audio Repeat Disc A-B Repeat Sacd or CD RepeatRandom Playback Figures 90 Audio Disc Program Playback ModeReset of Microprocessors MP3 Audio Playback MP3 Audio CD, Jpeg Photo CDs and Video CD PlaybackVideo CDs Jpeg Photo CDsVideo Settings How to Operate the MVP861, con’t Video Specifications Audio SpecificationsGeneral Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY
Top Page Image Contents