SETUP, con’t
4. Next continue to the BASS ENHANCER (2 channel) Menu. If no other changes are to be made in Setup Mode at this time, exit by pressing the Down direc- tional Push-button to select the EXIT SETUP menu choice followed by the SELECT Push-button and the MVP861 will return to normal operation.
Note: The SETUP Push-button may be also pressed to exit the setup mode.
Bass Enhancer (2 Channel)
The Bass Enhancer feature will copy the Low Frequency Information from the Left and Right Channels of a 2-Chan- nel CD recording and send it to the Subwoofer. To activate the feature performing the following steps:
1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Setup Disc Setup
Menu. Then press the Right directional Push-button to select the Audio Setup Menu Icon Tab. Refer to fig- ure 41.
Note: If there is a Disc playing in the MVP861 press the
STOP Push-button twice before pressing the
SETUP Push-button.
2. To change from the default setting of Off to On use the Up or Down directional Push-buttons to select BASS ENHANCER followed by the SELECT Push- button. Refer to figure 43.
Notes: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.
3.Return to the Audio Setup Menu by pressing the Up directional Push-button.
4.Next continue to the RATINGS Menu. If no other changes are to be made in Setup Mode at this time, exit
by pressing the Down directional Push-button to se- lect the EXIT SETUP menu choice followed by the SELECT Push-button and the MVP861 will return to normal operation.
Note: The SETUP Push-button may be also pressed to exit the setup mode.
