How to Operate the MVP861, con’t
Audio Disc Program Playback Mode
This feature allows for the playback of pre-selected Groups and/or Tracks of a DVD-Audio, SACD and CD Discs in the desired order. In the example below, a DVD-Audio Disc is programmed to play Group 2/Track 5 followed by Group 1/Track 2.
Notes: 1.The MVP861 must be in full STOP Mode (two presses of the STOP Push-button) with the Disc TOC (Table of Contents) read before the Program Playback Mode Feature can be activated.
2.When programming Hybrid SACD Discs, first choose the format (Multichannel, Stereo or CD) so the correct TOC can be read as some discs have different selections.
3.If a DVD-Audio disc has both formats (DVD-Audio and DVD-Music Video), only the DVD-Audio Groups/Tracks are programmable.
1.Press the PGM (Program) Push-button to access the On-Screen Program Mode. Refer to figures 88, 89 and 96.
Note: It is possible to enter a
Program using
just the Front Panel Alphanumeric Display, however it is easier to use the On-Screen Display as all of the desired Groups/Tracks are displayed at one time.
2.Enter the first Program Step, the desired selection and Group Number using the Numeric Push-but- tons. Refer to
figures 90, 91
and 96.
Note: There are only
Track numbers when Programming SACD and CD Discs. The On-Screen Display along with the Front Panel Display will not indicate space for entering Group Numbers. The MVP861 automatically stores into memory each of the program steps as they are entered.
3. In a similar manner, enter the remaining desired Groups and Tracks. Refer to figures 92 and 93.
Note: The Left or Right directional Push-buttons may be used for a given Progam Step, to go between the Group Number and Track Number. The CLEAR Push-button may be used to delete a selected Progam Step.
