McIntosh MVP861 owner manual Rear Panel Connections, Optical Output

Rear Panel Connections

UNBALANCED AUDIO OUTPUT	DIGITAL AUDIO	DATA IN receives
supplies Six Channels of Analog	OPTICAL OUTPUT	operating data from
Audio and connects to the External	sends signals to a	a McIntosh Control
Input of an A/V Control Center	Control Center with	Center
	a D/A Converter or
	a decoder

VIDEO OUTPUT supplies video sig- nals to connect to a Composite Input of an A/V Control Cen- ter or other video component

UNBALANCED	RS232 connector	POWER CONTROL IN
AUDIO OUTPUT	for connection to a	receives turn-on signals
supplies Two Chan-	remote control	from a McIntosh com-
nels of Analog Au-	device	ponent and POWER
dio and connects to		CONTROL OUT sends
the Analog Input of		turn-on signals on to
an A/V Control		another McIntosh Com-
Center		ponent

S-VIDEO OUTPUT supplies video signals to connect to a S Input of an A/V Control Center or other video component

BALANCED AUDIO	IR INput for
OUTPUTs supply two	connecting an
channels of analog audio	IR Receiver
to connect to Balanced
Inputs of other compo-
nents

Y OUTPUT supplies the Luminance Video Signal and	DIGITAL AUDIO
connects to the Y Component Input of the TV/Monitor	COAXIAL OUTPUT
or other video component.	sends signals to a
PB OUTPUT supplies the Blue minus Luminance	Control Center with a
Video Signal and connects to the PB Component Input	D/A Converter or a
of the TV/Monitor or other video component.	decoder
PR OUTPUT supplies the Red minus Luminance Video
Signal and connects to the PR Component Input of the
TV/Monitor or other video component

Connect the MVP861 power cord to a live AC outlet. Refer to infor- mation on the back panel of your MVP861 to determine the correct voltage for your unit

9