McIntosh MVP861 owner manual Lpcm 44.1kHz/48kHz

Page 32

How to Set the Audio, con’t

2. To change from the default setting of Normal to PCM use the Up or Down directional Push-buttons to select DIGITAL OUT followed by the SELECT Push- button. Refer to figure 40 on page 31.

Notes: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.

3.Return to the Audio Setup Menu by pressing the Up directional Push-button.

4.Next continue to the LPCM (44.1kHz/48kHz) Menu. If no other changes are to be made in Setup Mode at this

time, exit by pressing the Down directional Push- button to select the EXIT SETUP menu choice fol- lowed by the SELECT Push-button and the MVP861 will return to normal operation.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

LPCM (44.1kHz/48kHz)

The MVP861’s default setting is to make available at the Digital Outputs, the Digital Audio Signals of 96kHz or 88.2kHz from non-copyright protected DVDs. When the MVP861 is connected to a Digital-to-Analog Processing unit without the ability to process the higher digital sam- pling rate, the default setting can be changed to a 44.1kHz or 48kHz digital signal output by performing the following steps:

Notes: If the disk is copyright protected, the MVP861 will down convert the Digital Audio Signal to 44.1kHz or 48kHz. The MVP861’s internal digital to analog ciruitry will allways decode the highest sampling rate and will be available at the analog audio outputs.

1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Disc Setup Menu.

Then press the Right directional Push-button to se- lect the Audio Setup Menu Icon Tab. Refer to figure 41.

Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.

2. To change from the default setting of Off to On use the Up or Down directional Push-buttons to select LPCM (44.1kHz/48kHz) followed by the SELECT Push-button. Refer to figure 42.

Notes: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.

3.Return to the Audio Setup Menu by pressing the Up directional Push-button.

Figure 41

Figure 42

Figure 43

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Audio Video Player Luokan 1 Laserlaite Klass 1 Laser Apparat Important Safety Instructions Customer Service Table of ContentsThank You Please Take a MomentImportant Information, con’t Important Information and Connector InformationConnector Information Introduction and Performance Features Performance FeaturesDimensions MVP861 Dimensions Front View of the MVP861Rear View of the MVP861 Side View of the MVP861Installation Rear Panel Connections Optical OutputHow to Connect Control, Analog and Digital Audio How to Connect Video and AC Power Front Panel Indicators, Push-Buttons and Switch STANDBY/ONFront Panel Display Remote Control Push-Buttons How to Operate the Remote Control How to Operate the Setup Mode Setup and Default Settings Setup Mode Default Settings How to Set Disc Language DialogSETUP, con’t Disc MenusWall Paper How to Set the OSD On Screen DisplayOSD Language SETUP, con’t TV Type How to Set the VideoTV Aspect Video Out How to Set the Video, con’t Still ModeSqueeze Mode Black LevelProgressive Mode SETUP, con’t How to Set the Audio Audio ChannelChannel Level Adjustments SETUP, con’t How to Set the Audio, con’t Super Audio CD Digital OutLpcm 44.1kHz/48kHz Bass Enhancer 2 Channel How to Set the Ratings Rating LevelSETUP, con’t How to Set the Ratings, con’t PasswordSETUP, con’t Captions How to Set the Other SetupPlayer Mode Compression Auto Power Mode Slide ShowSETUP, con’t How to Operate the MVP861 Power OnHow to Load a DVD, Sacd or CD Disc How to Play a DVD DiscHow to Pause a Disc How to Play a Sacd DiscHow to Play a CD Disc How to Operate the MVP861, con’t Access a Specific Time location on a DVD DVD-Video Direct Chapter SelectionDVD-Audio Direct Track Selection DVD-Audio Group SelectionDVD-Audio Repeat How to Set and Activate MarkersDVD-Video Repeat Random Playback Sacd or CD RepeatDisc A-B Repeat Audio Disc Program Playback Mode Figures 90Reset of Microprocessors MP3 Audio CD, Jpeg Photo CDs and Video CD Playback MP3 Audio PlaybackJpeg Photo CDs Video CDsVideo Settings How to Operate the MVP861, con’t General Specifications Audio SpecificationsVideo Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY
Top Page Image Contents