McIntosh MVP861 owner manual How to Set the Audio, con’t

How to Set the Audio, con’t

Delay Time is measured in feet. The delays can be adjusted from 1 foot to 25 feet in one foot increments for each Loud- speaker.

Note: Before performing the Delay Time adjustments, you must first have completed the Loudspeaker Size and Level adjustments.

1. Measure the distances of the Loudspeakers used in the Home

Theater System, from the

Listening/ Viewing Area to each

Loud-					Figure 35
speaker
to within
the near-
est foot.
2. Use the
Down		Figure 34
direc-
tional Push-button to select DELAY TIME followed by
pressing the SELECT Push-button on the Remote Con-
trol. Refer to figures 35 and 36.
3. Use the Down	directional Push-button to select DIS-
TANCE then press the Right			or Left	directional
Push-buttons to select the desired measurement incre-
ments, either Feet or Meters.
4. Use the Down	directional Push-button to select
FRONT Lch then use the Right			or Left	directional
Push-buttons to enter in the distance of the Loud-					Figure 36
speaker from the Listening/Viewing Area. Refer to fig-
ure 37.

Note: The Menu choice of DEFAULT will reset all the

Loudpeaker Delay Time settings.

5.Enter in the distances for the remaining Loudspeakers.

6.When all the Loudspeakers distances are entered, press the RTRN (Return) Push-button for the SPEAKER

CONFIGURATION Menu. Then use the Down	di-
rectional Push-button to select AUDIO SETUP.

7.Next continue to the SUPER AUDIO SETUP Menu item. If no other changes are to be made in Setup Mode

at this time, exit by pressing the Down directional Push-button to select the EXIT SETUP menu choice followed by the SELECT Push-button and the MVP861 will return to normal operation.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

Figure 37

30