Sony NSX-A767 manual Press F to start play

EJECT

●On deck 1, tapes are always played back on both sides.

On deck 2, you can select a reverse mode to play back one or both sides,

●Use Type I (normal), Type II (high/CrOz) or Type IV (metal) tapes for playback.

1PressTAPE/DECK 1/2 and press A PUSH EJECT to open the cassette holder.

AP

E

Insert a tape with the exposed side down. Push the cassette holder to close.

2 Press <F to start play.

Selected deck number The tape counter

Playback side indicator

F:The front side is being played (forward).

+: The back side is being played (reverse).

To select a reverse mode (deck 2 only)

Each time REV MODE is pressed, the reverse mode changes.

To play one side only, select 1.

To play from front side to reverse side once only, select Z), To play both sides repeatedly, select C=).

●When tapes are loaded in both decks, =) on the display indicates Continuous Play.

To select a playing deck

When tapes are loaded in both decks, press TAPE/DECK 1/2 first to select a deck.

The selected deck number is displayed,

To stop play, press ■ .

To pause play (deck 2 only), press II. To resume play, press again.

To change the playback side, press 4 ➤ in play or pause mode. To fast forward or rewind, press < or -. Then press ■ to stop the tape.

To start play when the power is off (Direct Play Function)

Press TAPE/DECK 1/2. The power is turned on and play of the inserted tape begins.

To set the tape counter to 0000

Press ■ CLEAR in stop mode.

The counter is also set to 0000 when the cassette holder is opened and closed.

16 ENGLISH