Sony NSX-A767 manual Press CD and load the discs Press CD EDIT/CFIECK twice, Edit/Check

CD EDIT/

CHECK

4,5

SHIFT

In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.

m

The programmed edit recording will not start from a point halfway in the tape, The tape must be recorded on from the beginning of either side.

1 Insert the tape into deck 2,

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press CD and load the disc(s).

3 Press CD EDIT/CFIECK twice

When using the remote contro-;	CD EDIT/CHECK twice
while pressing SHIFT.
“EDIV and “PRGM”are displayed.

●When “AI”is displayed, press CD EDIT/CHECK again,

4 Press numbered buttons on the remote control to designate the tape length.

1()to 99 minutes can be specified.

●The +4, - or MULTI JOG are also available to designate the tape length.

Tape length Tape side A (front side)

Maximum recording time for side A

5 Press DISC DIRECT PLAY 1-3 to select a disc. Then, press numbered buttons 0-9 and +1 O on the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and O.

	Remaining time	Programmed
Selected track number	on side A	tracks

Program number

6	Repeat step 5 for the			rest of the tracks	for	side	~
	A.						g
	A track whose		playing time is longer than the remaining			time	~
	cannot	be programmed.					o
7	Press	CD	EDIT/CHECK	to select side	B	and	$!
	program the tracks for side B.						u

After confirming “B”on the display, repeat step 5.

Tape side B (reverse side)

8Press O REC/REC MUTE to start recording.

The tape is rewound to the beginning of the front s~e, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press W. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers Before recording, press CD EDIT/CHECK to select side A or B, and press +4 or ** repeatedly.

Programmed track

Disc number Track number numbers

Tape side Program number

To change the Iprogram of each side

Press CD EDIT/CHECK to select side A or 13,and press ❑ CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ❑ CLEAR twice so that “EDIT”disappears on the display,

m

●Up to 30 tracks can be programmed from any of the inserted

discs.

@“FULL”is displayed if you attempt to program more than 30 tracks.

*Recording is inhibited if the erasure prevention tab on either side of the tape ie broken off.

ENGLISH 23