Sony NSX-A767 manual Random iREPEAT Play, BiANK SKIP’-PLAY’‘~‘‘~

	,.
RANDOM iREPEAT PLAY”	‘“““ ““’ ““”

Use the remote control.

RANDOM play

All the tracks on the selected disc or all the discs can be played randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press RANDOM/REPEAT while pressing SHIFT.

Each time it is pressed, the function can be selected cyclically. RANDOM play — RANDOM lights up on the display. REPEAT play — CL lights up on the display. RANDOM/REPEAT play — RANDOM and C& light upon the display,

Cancel — RANDOM and CL disappear from the display.

llplav all discs, press +- to start play.

To tAav a sirmle disc, press one of DISC DIRECT PLAY 1-3 to start play.

During random play it is not possible to skip to the previously played track with +.

., ..’..: ,. :’.’’.’,!.,:,,~,,”,,..!*, ““.

BiANK SKIP”’-PLAY’”‘“”~‘“‘~

The silent portions between tracks recorded on a CD can be skipped during playback.

f Press CD BLANK SKIP.

“CDBLANK SKIP ON” is displayed and a small dot appears in the display.

Small dot

2 Press 4E to start playback.

The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track fades out (ends with the sound gradually decreasing), the fadeout portion also will be skipped.

To return to normal playback

Press CD BLANK SKIP again, and “CDBLANK SKIP OFF” is displayed and the dot in the display disappears.

m

*There may be a case where BLANK SKIP PLAY does not function correctly.

*BLANK SKIP PLAY is automatically canceled when performing Al EDIT RECORDING (page 22), PROGRAMMED EDIT RECORDING (page 23), or recording during PROGRAMMED PLAY (page 19) or RANDOM PLAY (page 19).

Up to 30 tracks can be programmed from any of the inserted

discs,	—
	,- +
	Pal	2
		5
		44.-

Use the remote control.

1 Press PRGM twice while pressing SHIFT in stop mode.

“PRGM”is displayed

PRGM

●When PRGM is pressed once in step 1, the unit enters the KARAOKE PROGRAM (page 25).

2 Press DISC DIRECT PLAY 1-3 to select a disc.

Go to the next step when the tray stops rotating.

3Press numbered buttons 0-9 and +1 O to program a track.

Example:

To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and 0.

Selected track number Total number of selected tracks

		Program	number		Total playing	time of
					the selected	tracks
4	Repeat	steps	2 and	3 to program	other tracks.
5	Press	4P to start		play.

To check the program

Each time - or >- is pressed in stop mode, a disc number, track number, and program number will be displayed.

To clear the program

Press ❑ CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT’ repeatedly while pressing SHIFT until ~ appears on the display.

m

●During programmed play, you cannot perform random play, check the remaining time, and select a disc or track. “CAN’l- USE” is displayed if you attempt to select a track.

●“FULP is displayed if you attempt to program more than 30

tracks. ENGLISH 1$)