Onkyo USR-5RF instruction manual Editing timers, Organizing macros and timers into groups

Page 32

Getting the Maximum out of it

6.Tap the clock button and set the start time using the Left/Right buttons.

7.Tap one or more day buttons to select or deselect days for the timer.

You can choose to repeat the timer weekly.

8.Scroll down to display the second timer control panel in which you can set the stop time.

9.Enter the command the timer has to execute.

10.Tap the clock button and set the stop time using the Left/Right buttons.

11.Press the Left button to close the timer.

A confirmation screen appears, which allows you to save or cancel the timer.

12.Tap Save.

The timer is activated.

Note:

The timer only works when the remote controller’s sending eye is pointed towards the controlled device and no obstructions interfere the infrared signal.

Editing timers

You can edit any timer you have set.

1.Open the timer group that contains the timer.

2.Switch to Edit mode via the Mode button.

3.Tap the timer you want to edit.

The contents of the timer appear.

4.Edit the timer.

5.Press the Left button to close the timer.

A confirmation screen appears, which allows you to save or cancel the timer.

6.Tap Save.

The timer is edited.

Organizing macros and timers into groups

You can create as macro groups or timer groups up to 25 macros or timers in each group.

1.Open any macro or timer group.

2.Switch to Add mode by using the Mode button.

You can create a new group, copy an existing group, or restore a previous deleted group.

•Create a new group: You add a new group in which you can record new macros.

•Copy an existing group: You copy a group and its macros and use it for new macros.

•Restore a previously deleted group: You restore a deleted group and reuse the macros.

3.Tap Create Timer Group or Create Macro Group.

32

Image 32

Contents USR-5RF Precautions CareTable of contents Quick Start Insert batteriesTouch the screen to start Operate your componentsQuick reference Quick referenceQuick reference ModesIntroduction Intelligent Remote ControllerDirect-access buttons Which Buttons Can Be Programmed? Left and Right buttonsTouchscreen buttons Charging the Remote Controller AA batteriesOptional recharging dock Define the Brand of Your Device Activate the remote controllerGetting Started Tap Next Defining brands by selectingSelect Yes to define the brand of the device to operate Navigate through the list of brands Select your brand from the listSelect a code set from the list Defining brands by searching Tap SearchVia the Device menu Select a DeviceVia the Home menu Using touchscreen buttons Sending commandsOperate a Device ScrollingIR commands Device pages Adjust the Settings Touch and hold the remote controller icon for a few secondsTap the button of the setting you want to adjust Use the Left and Right button to adjust the settingSecond setup panel Third setup panelWorking with Modes Getting the Maximum out of itIntroduction Tap Tap the mode you want to useTo hide the Mode menu Programming Buttons Programming control panel buttonsMake sure the device tab is active Programming direct-access and Left/Right ButtonsProgramming device items Edit the label Labeling Buttons and Menu ItemsLabeling a button Labeling a menu item Complete instruction 4 to 6 Labeling a button onMoving menu items Adding and Moving DevicesAdding devices Deleting a button or button function Delete and restoreDelete Restore Tap the item you want to restoreRecording Macros and Setting Timers Recording macrosSetting timers Editing macrosEditing timers Organizing macros and timers into groupsEdit the timer Press the Left button to close the timer Tap Create Timer Group or Create Macro GroupUsing the remote controller with Radio Frequency Tap RF Changing the remote controller’s RF IR SettingsSwitch to RF IR mode by using Mode button Try the devices which you just changed the RF IR settings Changing the Extender IDSwitch back to RF IR mode Select a device that is set with RF signalsChoosing Another Channel Press the + and action buttons to change the ChannelChadEdit With ChadEdit you canSystem requirements Troubleshooting General Problems Programming ProblemsRecharging Problems Can I program a button to execute more than one command? How do I program source switching?How do I reset the Remote controller? How do I revert to the original configuration?Overview of Symbols Specifications Onkyo U.S.A. Corporation