GE DVMRe Main Menu → Time/Date → Set Region, Main Menu → Time/Date → Network Time Setup

qMain Menu → Time/Date → Set Region

Use this menu to set the region for the Auto Daylight Savings Time feature. Choices are:

∙OFF: Clock will not be changed automatically, but can still be adjusted by one hour using the daylight saving macros.

∙USA: DST starts at 02:00 on the first Sunday in April. DST ends at 02:00 on the last Sunday in October. Includes: United States (except Hawaii, American Samoa, Guam, Puerto Rico, Virgin Islands, parts of Indiana and Arizona) and Canada (except Saskatchewan).

∙EUR: DST starts at 01:00 GMT on the last Sunday in March. DST ends at 01:00 GMT on the last Sunday in October. Includes: European Union Countries.

Regional Settings

Daylight Saving :		USA
Time Zone	:	GMT+00:00

SUN, 7 APR 2002 02:00 (+1) SUN, 27 OCT 2002 02:00 (-1)

[CANCEL] [OK]

∙AUS: DST starts at 02:00 on the last Sunday in October. DST ends at 03:00 on the last Sunday

in March. Includes: South Australia, Victoria, ACT, NSW. Excludes: Tasmania.

The Time Zone must be set correctly to ensure that the DST adjustments are made at the right time. It is also required for accurate email time stamping.

The clock will only be automatically adjusted once on a given time and date. If you manually NOTE set the clock back before the last DST change, the time will not get automatically adjusted

again for that same time change.

qMain Menu → Time/Date → Network Time Setup

Use this menu to enable/disable and specify how often time synchronization should occur between the Triplex and the Network Server. The Region /Time Zone must be setup prior to enabling the option.

Update Interval, Select from: Enable, Disable, Once per Day, Twice per Day, and Once per Hour

NTP Primary Server: Enter IP Address of Primary Server.

NTP Backup Server: Enter IP Address of Backup Server.

1.To save changes and exit the menu: Select [OK], then press the Enter button.

2.To exit the menu without making changes: Press the Menu button, or select [CANCEL], and then press the Enter button.

Network Time Protocol Setup

Update Interval	: DISABLE
NTP Primary Server	:	3.	37.	8.	26
NTP Backup Server	:	0.	0.	0.	0

[CANCEL] [OK]

Last Update: Never Since Power-up

Warning: Region/Time Zone must be set correctly!

0150-0193F 34 Kalatel DVMRe Triplex