Global Alarm Record Rate
60 pps
40 days 20 h (Alarm)
15 days 11 h (Total)
[CANCEL] [OK]
Estimate of the % of time the unit will typically spend in alarm mode. For example
if you expect to have about 5 total periods of alarms each day, each lasting 3 minutes on average, then the % of the time will be 1%. (15 min/24 hours)
Record
Duration
Calculator
1.Rotate the Jog to navigate, and the Shuttle to change the values.
2.To save changes and exit the menu: Select [OK], and then press the Enter button.
3.To exit the menu without making changes: Press the Menu button, or select [CANCEL], then press the Enter button.
qMain Menu → Record → Record Mode
Use this menu to specify how the unit will handle data overwrite issues once the hard disk becomes full.
No Overwrite:
No overwrite
Write once
Continuous
∙Recording starts at the end of the last recording.
∙Recording stops when disk becomes full.
∙When the hard disk becomes full, the unit displays an
Write Once:
∙Recording starts at the end of the last recording.
∙Recording stops when disk becomes full.
∙The user is prompted to authorize overwriting old data.
Continuous:
∙Recording starts at the end of the last recording.
∙Unit overwrites all previously recorded data, overwriting the oldest data first.
∙The unit does not stop recording when disk becomes full.
q Main Menu → Record → Disk Maintenance
Use the Jog to select from the following options, then press the |
|
Enter button to begin. | Delete |
| |
Delete: Delete all data from the hard disk (with the possibility of restoring it). | UnDelete |
| |
Undelete: Restore data that has been deleted, but not yet overwritten. | Destroy |
Destroy: Erase all data from the hard disk permanently, without the possibility |
|
of restoring it. Selecting this option brings up a confirmation dialog box. |
|
40 | Kalatel DVMRe Triplex |