Programming the Mio R-4
"^" Button Commands with Embedded Codes
^BMF
(Cont.)
For some of these commands and values, refer to theRGB Values for all 88
Basic Colors table on page 35.
•’%CF<on fill color>’ = Set Fill Color.
•’%CB<on border color>’ = Set Border Color.
•’%CT<on text color>’ = Set Text Color.
•’%SW<1 or 0>’ = Show/hide a button.
•’%ST<style>’ = Button style.
•’%EN<1 or 0>’ = Enable/disable a button.
•’%WW<1 or 0>’ = Word wrap ON/OFF.
•’%GH<bargraph hi>’ = Set the bargraph upper limit.
•’%GL<bargraph low>’ = Set the bargraph lower limit.
•’%GN<bargraph slider name>’ = Set the bargraph slider name/Joystick cursor name.
•’%GC<bargraph slider color>’ = Set the bargraph slider color/Joystick cursor color.
•’%GI<bargraph invert>’ = Set the bargraph invert/noninvert or joystick coordinate (0,1,2,3). ^GIV section on page 59 more information.
•’%GU<bargraph ramp up>’ = Set the bargraph ramp up time in intervals of 1/ 10 second.
•’%GD<bargraph ramp down>’ = Set the bargraph ramp down time in 1/10 second.
•’%GG<bargraph drag increment> = Set the bargraph drag increment. Refer to the ^GDI command on page 59 for more information.
•’%OT<feedback type>’ = Set the Feedback (Output) Type to one of the following:
None, Channel,Invert, ON (Always ON), Momentary, or Blink.
•’%SM’ = Submit a text for text area button.
•’%SF<1 or 0>’ = Set the focus for text area button.
•
•
•’%UN<Unicode text>’ = Set the Unicode text. See the^UNI section on
page 64 for the text format.
•’%EF<text effect name>’ = Set the text effect.
•’%EC<text effect color>’ = Set the text effect color.
•’%ML<max length>’ = Set the maximum length of a text area.
•’%MK<input mask>’ = Set the input mask of a text area. Example:
SEND_COMMAND
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and Bitmap.
48 | Mio Modero |