AMX Mio Modero R-4 manual Sendcommand DEV,LVP-view address,index, Sendcommand Device,LVP-5,3

Programming the Mio R-4

List Box Commands (Cont.)

List View Commands
^LVP	Display a new position. If the select option is set, then select that position.
Display a new position	Syntax:
	SEND_COMMAND <DEV>,"'^LVP-<view address>,<index>'"
	Variables:
	• view address = the address of the view definition
	• index = the row number in sequential order (first row is 1)
	Example:
	SEND_COMMAND Device,"'^LVP-5,3'"
	Sets the display position starting at the third row and displays it according to
	the view definitions located at address 5.
^LVS	Set the column order for sorting. Update must be called for changes to take
Set the column order for	effect.
sorting	Syntax:
	SEND_COMMAND <DEV>,"'^LVS-<view
	address>,<column>,<column>…'"
	Variables:
	• view address = the address of the view definition
	• column = the starting column number (first column is 1)
	Example:
	SEND_COMMAND Device,"'^LVS-3,5,2,1'"
	Sets the column sort order to column 5 first, then column 2 and then column 1.
	The data list is displayed according to the view definitions located at address 3.
^LVU	Update any view currently looking at this list.
Update any view currently	NOTE: This must be called after changes to list data.
looking at this list	Syntax:
	SEND_COMMAND <DEV>,"'^LVU-<view address>'"
	Variables:
	• view address = the address of the view definition
	Example:
	SEND_COMMAND Device,"'LVU-3'"
	Updates the data list and displays it according to the view definitions located at
	address 3.

86 Mio Modero R-4