AMX Mio Modero R-4 manual Jst, Sho, Tec

					Programming the Mio R-4
"^" Button Commands (Cont.)
^JST	Set text alignment using a numeric keypad layout for those buttons with a defined address
Set text	range. The alignment of 0 is followed by ',<left>,<top>'. The left and top coordinates are
	relative to the upper left corner of the button.
alignment using a
numeric keypad	Syntax:
layout for those	"'^JST-<vt addr range>,<button states range>,<new text
buttons with a
	alignment>'"
defined address
	Variable:
range
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• new text alignment = Value of 1 - 9 corresponds to the following locations:
	0
		1	2	3	Zero can be used for an absolute position
		4	5	6
		7	8	9
	Example:
	SEND_COMMAND Device,"'^JST-500.504&510.515,1&2,1'"
	Sets the text alignment to the upper left corner for those buttons with variable text ranges
	of 500-504 & 510-515.
^SHO	Show or hide a button with a set variable text range.
Show or hide a	Syntax:
button with a set	"'^SHO-<vt addr range>,<command value>'"
variable text
	Variables:
range
	• variable text address range = 1 - 4000.
	• command value = (0= hide, 1= show).
	Example:
	SEND_COMMAND Device,"'^SHO-500.504&510.515,0'"
	Hides buttons with variable text address range 500-504 & 510-515.
^TEC	Set the text effect color for the specified addresses/states to the specified color. The Text
Set the text effect	Effect is specified by name and can be found in TPD4. You can also assign the color by
	name or RGB value (RRGGBB or RRGGBBAA).
color for the
	Syntax:
specified
addresses/states	"'^TEC-<vt addr range>,<button states range>,<color value>'"
to the specified
	Variable:
color
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• color value = Refer to theRGB Values for all 88 Basic Colors table on page 35.
	Example:
	SEND_COMMAND Device,"'^TEC-500.504&510.515,1&2,12'"
	Sets the text effect color to Very Light Yellow on buttons with variable text 500-504
	and 510-515.

Mio Modero R-4 63