AMX Mio Modero R-4 manual Gsn, GSN-vt addr range,bargraph slider name, Ico

				Programming the Mio R-4
"^" Button Commands (Cont.)
^GSN	Change the bargraph slider name or joystick cursor name. Slider names and cursor
Change the	names can be found in the TPDesign4 slider name and cursor drop-down list.
	Syntax:
bargraph slider
name or joystick	"'^GSN-<vt addr range>,<bargraph slider name>'"
cursor name
	Variable:
	• variable text address range = 1 - 4000.
	• bargraph slider name = See table below.
		Bargraph Slider Names:
		None	Ball	Circle -L
		Circle -M	Circle -S	Precision
		Rectangle -L	Rectangle -M	Rectangle -S
		Windows	Windows Active
		Joystick Cursor Names:
		None	Arrow	Ball
		Circle	Crosshairs	Gunsight
		Hand	Metal	Spiral
		Target	View Finder
	Example:
	SEND_COMMAND Device,"'^GSN-500,Ball'"
	Changes the bargraph slider name or the Joystick cursor name to ’Ball’.
^ICO	Set the icon to a button.
Set the icon to a	Syntax:
button	"'^ICO-<vt addr range>,<button states range>,<icon index>'"
	Variable:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• icon index range = 0 - 9900 (a value of 0 is clear).
	Example:
	SEND_COMMAND Device,"'^ICO-500.504&510.515,1&2,1'"
	Sets the icon for On and Off states for buttons with variable text ranges of 500-504 &
	510-515.

Mio Modero R-4 61