AMX Mio Modero R-4 manual Gll, Grd, Gru, Gsc

Programming the Mio R-4

"^" Button Commands (Cont.)

^GLL	Change the bargraph lower limit.
Change the	Syntax:
bargraph lower	"'^GLL-<vt addr range>,<bargraph low>'"
limit
	Variable:
	• variable text address range = 1 - 4000.
	• bargraph limit range = 1 - 65535 (bargraph lower limit range).
	Example:
	SEND_COMMAND Device,"'^GLL-500,150'"
	Changes the bargraph lower limit to 150.
^GRD	Change the bargraph ramp-down time in 1/10th of a second.
Change the	Syntax:
bargraph	"'^GRD-<vt addr range>,<bargraph ramp down time>'"
ramp-down time
	Variable:
in 1/10th of a
second	• variable text address range = 1 - 4000.
	• bargraph ramp down time = In 1/10th of a second intervals.
	Example:
	SEND_COMMAND Device,"'^GRD-500,200'"
	Changes the bargraph ramp down time to 20 seconds.
^GRU	Change the bargraph ramp-up time in 1/10th of a second.
Change the	Syntax:
bargraph	"'^GRU-<vt addr range>,<bargraph ramp up time>'"
ramp-up time in
	Variable:
1/10th of a
second	• variable text address range = 1 - 4000.
	• bargraph ramp up time = In 1/10th of a second intervals.
	Example:
	SEND_COMMAND Device,"'^GRU-500,100'"
	Changes the bargraph ramp up time to 10 seconds.
^GSC	Change the bargraph slider color or joystick cursor color. A user can also assign the color
Change the	by Name and R,G,B value (RRGGBB or RRGGBBAA).
	Syntax:
bargraph slider
color or joystick	"'^GSC-<vt addr range>,<color value>'"
cursor color
	Variable:
	• variable text address range = 1 - 4000.
	• color value = Refer to theRGB Values for all 88 Basic Colors table on page 35.
	Example:
	SEND_COMMAND Device,"'^GSC-500,12'"
	Changes the bargraph or joystick slider color to Yellow.

60 Mio Modero R-4