AMX Mio Modero R-4 manual Akeyr, @Akp, @Akr, Beep, Brit, @Brt

	Programming the Mio R-4
Panel Run Time Commands (Cont.)
AKEYR	Remove the Keyboard/Keypad. Remove keyboard or keypad that was displayed using
Remove the	'AKEYB', 'AKEYP', 'PKEYP', @AKB, @AKP, @PKP, @EKP, or @TKP commands.
Keyboard/Keypad	Syntax:
	SEND_COMMAND <DEV>,"'AKEYR'"
	Example:
	SEND_COMMAND Device,"'AKEYR'"
	Removes the Keyboard/Keypad.
@AKP	Pop up the keypad icon and initialize the text string to that specified. Keypad string is set
Pop up the	to null on power up and is stored until power is lost. The Prompt Text is optional.
	Syntax:
keypad icon and
initialize the text	SEND_COMMAND <DEV>,"'@AKP-<initial text>;<prompt text>'"
string
	Variables:
	• initial text = 1 - 50 ASCII characters.
	• prompt text = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Device,"'@AKP-12345678;ENTER PASSWORD'"
	Pops up the Keypad and initializes the text string '12345678' with prompt text 'ENTER
	PASSWORD'.
@AKR	Remove the Keyboard or Keypad. Remove keyboard or keypad that was displayed using
Remove the	'AKEYB', 'AKEYP', 'PKEYP', @AKB, @AKP, @PKP, @EKP, or @TKP commands.
Keyboard or	Syntax:
Keypad	SEND_COMMAND <DEV>,"'@AKR'"
	Example:
	SEND_COMMAND Device,"'@AKR'"
	Removes the Keyboard/Keypad.
BEEP	Output a beep.
Output a beep	Syntax:
	SEND_COMMAND <DEV>,"'BEEP'"
	Example:
	SEND_COMMAND Device,"'BEEP'"
	Outputs a beep.
BRIT	Set the panel brightness.
Set the panel	Syntax:
brightness	SEND_COMMAND <DEV>,"'BRIT-<brightness level>'"
	Variables:
	• brightness level = 0 - 100.
	Example:
	SEND_COMMAND Device,"'BRIT-50'"
	Sets the brightness level to 50.
@BRT	Set the panel brightness.
Set the panel	Syntax:
brightness	SEND_COMMAND <DEV>,"'BRIT-<brightness level>'"
	Variables:
	• brightness level = 0 - 100.
	Example:
	SEND_COMMAND Device,"'BRIT-70'"
	Sets the brightness level to 70.

Mio Modero R-4 75