AMX Mio Modero R-4 manual Tef, Txt, Uni

Programming the Mio R-4

"^" Button Commands (Cont.)

^TEF	Set the text effect. The Text Effect is specified by name and can be found in TPD4.
Set the text effect.	Syntax:
	"'^TEF-<vt addr range>,<button states range>,<text effect name>'"
	Variable:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• text effect name = Refer to theText Effects table on page 40 for a listing of text
	effect names.
	Example:
	SEND_COMMAND Device,"'^TEF-500.504&510.515,1&2,Soft Drop Shadow
	3'"
	Sets the text effect to Soft Drop Shadow 3 for the button with variable text range 500-504
	and 510-515.
^TXT	Assign a text string to those buttons with a defined address range. Sets Non-Unicode text.
Assign a text	Syntax:
string to those	"'^TXT-<vt addr range>,<button states range>,<new text>'"
buttons with a
	Variables:
defined address
range	• variable text address range = 1 - 4000.
	• button states range = 1 - 2 (1 = Off state, 2 = On state).
	• new text = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Device,"'^TXT-500.504&510.515,1&2,Test Only'"
	Sets the On and Off state text for buttons with the variable text ranges of
	500-504 & 510-515.
^UNI	Set Unicode text. For the ^UNI command (%UN and ^BMF command), the Unicode text
Set Unicode text	is sent as ASCII-HEX nibbles.
	Syntax:
	"'^UNI-<vt addr range>,<button states range>,<unicode text>'"
	Variables:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 2 (1 = Off state, 2 = On state).
	• unicode text = Unicode HEX value.
	Example:
	SEND_COMMAND Device,"'^UNI-500,1,0041'"
	Sets the button’s unicode character to ’A’.
	Note: To send the variable text ’A’ in unicode to all states of the variable text
	button 1, (for which the character code is 0041 Hex), send the following command:
	SEND_COMMAND Device,"'^UNI-1,0,0041'"
	Note: Unicode is always represented in a HEX value.

64 Mio Modero R-4