Orion Car Audio OE331-21 manual Analog Input Configurations

Page 10

Analog Input

Configurations

The first five analog inputs and input #7 can be configured in several different ways. Input #6 can be used for Static Pressure and accepts the standard pressure sensor with the phone jack connector, available from WattMaster Controls.

The following configurations are available:

1.Thermister Type III Temperature Sensors (Scaled for Fahrenheit)

2.Thermister Type III Temperature Sensors (Scaled for Celsius)

3.4 – 20ma User Scaled

4.0 – 5 vdc User Scaled

5.Wall Sensor Slide Offset

6.Binary Contact Closure

7.Read Global Analog Broadcast from another Controller

4

Image 10

Contents GPC Plus Controller Page OE331-21-GPC OE331-21-GPCPLUS +VDC AIN1 Page Description General Purpose ControllerMain Status Screen Analog Inputs Relays Analog Outputs Week Schedules & Holidays Analog Input Configurations Page Page RH% Wall Sensor Slide Offset Optimal Start Temperatures Push-Button OverrideAnalog Input #6 Relay Output Configuration Control MethodsReset Source Limits Control/Reset SourcesDelay & Run Times Enabling RelayControlling Schedule Controlling Setpoint DeadbandAND/OR Conditional Tests Global Binary Channel Run Time AlarmRelay Output Type Lead/Lag ControlVentilation Control Analog Output Configuration Possible Control ModesFloating Point Control Possible Control SourcesPID Control Economizer Control Proportional Reset SignalAlternate Override Lead/Lag Pump VFD Control Sample Configurations Sample #1Page Page Relay Output #2 Programming Used for Boiler #1 Relay Output #3 Programming Used for Boiler #2 Relay Output #4 Programming Used for Boiler #3 Relay Output #5 Programming Used for Boiler #4 Operation Page Sample #2 Page Page Page Main Status Screen Failure Mode Page