Mitsubishi Electronics WD-62827 manual DVD Player with Component Video, DVI Device

Connecting a DVD Player with Component Video Connecting a DVI Device

DVD Player with Component Video

Figure 9

Component video cables and audio cables are required. These are not included with the TV.

1.Connect the Component Video cables from Y/Pr/ Pb VIDEO OUT on the back of the DVD player to COMPONENT-2 on the TV back panel, matching the correct connection:

•Y to Y (Green)

•Pr to Pr (Red)

•Pb to Pb (Blue)

2.Connect a set of audio cables from AUDIO OUT

on the back of the DVD player to COMPONENT-2 AUDIO Input on the TV back panel. The red cable connects to the R (right) channel, and the white cable connects to the L (left) channel.

57 #BDL 1BOFM
			$0.10/&/5
	*/165		:1C1S JQQJ	
			2
								*/165	065165
					:
								%7*	"6%*0	3&$03%
47*%&0							"OBMPH "VEJP		065165	065165
					1C					7*%&0
			8IJUF
7*%&0					1S					(MONO)
										AUDIO-
										LEFT/
"6%*0					"6%*0
-&'5					-&'5					"6%*0
.0/0					.0/0
										3*()5
"6%*0					"6%*0
3*()5					3*()5	
			3FE				.0/*503-*/,™)%.*		1$ '03 )%.* 
							7*%&0 JQQJ 0/-:  )[
							"6%*0 1$. -*/&"3		7(" 87("
									47(" 847("
									9("  9 
(-JOL¸

DVI Device

Figure 10

ADVI-to-HDMI cable or DVI/HDMI adaptor and HDMI cable and audio cables are required. These are not included with the TV. They may be available at your local electronics retailer.

1.Connect the DVI-to-HDMI cable (recommended) or HDMI cable with DVI/HDMI adaptor from the DVI device’s back panel to the TV back panel.

NOTE: If you are using a DVI/HDMI adaptor, it is important to connect the adaptor to the DVI device for best performance.

2.Connect a set of audio cables from AUDIO OUT on the DVI device back panel to the INPUT/DVI Analog Audio on the TV back panel. The red cable connects to the R (right) channel, and the white cable connects to the L (left) channel.

NOTE: The HDMI connection supports copy protection (HDCP). Some devices require connecting to an analog input first, in order to view on-screen menus and select DVI as the ouput. Please review your equipment instructions for DVI connectivity and compatibility.



: 7*%&0

$#

065165

%7%
1MBZFS

	"6%*0 065						"$ */
 $) 463306/%	$)	#*5453&".1$.	.*546#*4)*
			%7% 1-":&3
		8IJUF				
$&/5&3				.0%&-	%%
	-		108&3 4611-: 7_ )[
			108&3 $0/46.15*0/ 8

	1C	"OBMPH		"VEJP	065165		065165
								7*%&0
	1S							AUDIO-
								LEFT/
								(MONO)
"6%*0
	-&'5							"6%*0
.0/0
								3*()5
"6%*0
					
	3*()5
		.0/*503-*/,™)%.*				1$ '03 )%.* 
		7*%&0 JQQJ				0/-:  )[
		"6%*0 1$. -*/&"3				7(" 87("
						47(" 847("
						9("  9 

5&3

NNBOE¸

57
#BDL
1BOFM

4

$3

7*%&0
065

3	%*453*#65&% #:
		.*546#*4)* %*(*5"- &-&$530/*$4
	".&3*$" */$
46#800'&3 463306/% '30/5	$0"9*"- 015*$"-

3FE

	64& 8*5)	™
	$BCMF$"3%
			%*(*5"-
			"6%*0
69	"/5   ."*/			$BCMF$"3%™		"/5	 $"3% 501
			065165		64& 8*5)



*&&&


*/165

065165

Figure 9. Connecting a DVD Player with Component Video

Note: NetCommand® assumes you connected your DVD player to Component-2. If you add a second DVD or use any other inputs for your DVD, this change must be reflected in the NetCommand system. See Edit NetCommand... in Chapter 3 for more information.



%7*UP)%.*
$BCMF

%7*
%FWJDF

"6%*0
065 

-

3

IMPORTANT

See Appendix A for component video signal	Figure 10. Connecting a DVI Device
compatibility information.
For digital audio connections to your
A/V receiver, see your DVD player and A/V
receiver Owner’s Guides.

28Chapter 2. Connecting