Mitsubishi Electronics WD-62827 Compatible Ieee 139 Devices, When Connecting Ieee 139 Devices

Page 33

Connecting Compatible IEEE 139 Devices

Compatible IEEE 139 Devices

Compatible A/V devices include some, but not all, cable boxes, D-VHS VCRs, A/V discs, and future products. It is also possible to connect devices to the TV that have IEEE 1394 connectors but are not compatible with the TV or with the NetCommand® control system. Areas of compatibility to consider are:

1. Digital Video Signals

The TV is able to decode MPEG2 and DV video as provided by some camcorders. If the TV is unable to decode the digital signal supplied by your camcorder, try S-video and analog audio connections instead. Other types of digital video, such as PC video provided by some computers, must be decoded by the source device and sent to the TV as analog video, S-video, or HDMI video.

2. Digital Audio Signals

When received with video signals, the TV is able to decode Dolby Digital signals and MPEG audio signals. Other types of digital audio as provided by some digital recording devices, such as MP3 audio and DTS audio, cannot be decoded by the TV when received over IEEE 1394

The TV may not be able to pass incompatible digital audio signals on the coaxial digital audio output, however, these signals may pass on the IEEE 1394 cable to other devices.

3. Digital Control Signal

The TV can serve as the control center for IEEE 1394 audio/video devices, such as VCRs, A/V Discs, tuners, cable boxes and amplifiers that are compatible with the following IEEE 1394 control standards.

•EIA-775is designed for tuning devices such as cable boxes, allowing the device to send simple graphics. This standard does not, however, allow the TV to control the cable box by IEEE 1394.

•AV/C (Audio Video Control) is designed to provide basic controls such as play, stop, channel selection, and volume, as appropriate for the device.

The IEEE 1394 interface may not provide reliable control signals for some DV camcorders, especially older models. If your camcorder operates incorrectly or not at all, use the camcorder’s control buttons instead of the IEEE 1394 connection.

Some devices may be a combination of two or more types of devices. For example, there may be a recording device that is also a tuning device. Each portion of the device is called a sub-unit. When you select a device on the Device Selection menu that has sub-units, a pop- up menu will appear so you can select which sub-unit section you wish to use.

When Connecting IEEE 139 Devices

•Do not loop the last device in the chain back to the TV. When the device chain is looped, the TV may not be able to work with the other devices.

%JHJUBM %7%

%JHJUBM 7$3

57

•Place devices that have only a mechanical (two- position) power switch at the end of the chain or leave the power switch in the On position. When turned Off, IEEE 1394 signals may not be able to pass through the device to other devices.

•Place devices with the slowest communication speed at the end of the chain. Sometimes the communication speed will be marked near the IEEE 1394 connector with an “S” number. The higher the number, the faster the communication speed. This TV has a communication speed of S400. Devices with slow communication speed can interfere with IEEE 1394 signals from faster devices. When using NetCommand to set up a digital recording between a faster device and a slower device, make the slower device the source and make the faster device the recorder.

•Do not use an IEEE 1394 cable over 15 feet in length between each device.

•This TV is an IEEE 1394a device. It can be used with a 1394b system when an IEEE-1394a-to-1394b convertor is used. 1394b systems are capable of greater distances and multi-room applications.

IMPORTANT

DV Camcorder Notes

A.When viewing DV camcorders, it is normal for temporary audio and video distortion to occur under conditions such as:

•Playback start and stop

•Playback pause

•Forward or reverse picture search

B.Some DV Camcorder models are not compatible with this TV’s IEEE 139 system and the “New 139 Device” screen will not appear when

the camcorder is connected. For playback of incompatible DV camcorders, try S-video and analog audio connections instead.

C.TV Disc cannot record DV video. Record DV video on an IEEE 139 device designed to record DV video.

Chapter 2. Connecting

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents TV Information Visit our website atWhile Under Warranty After Warranty TV Guide On Screen Access RequirementsStand Requirement TV Model Number Stand Model NumberFCC Declaration of Conformity Important Safeguards Important Safeguards Contents Mitsubishi DLP Projection Television Limited Warranty Mitsubishi Digital Electronics America, Inc Our ThanksChapter       TV AccessoriesSpecial Features of Your TV Widescreen Picture Format Memory Card ReaderTV Guide On Screen Interactive Program Guide System Memory Card Reader and Front-Panel Inputs Input 3 and Ieee 1394 Input/OutputCard Compatibility Reset Front-Panel Indicator Lights Lamp IndicatorFront Control Panel Power/Timer Indicator Status IndicatorOverview Remote ControlBattery Installation Sleep TimerCare TV Back Panel IR Emitter NetCommandInput 1 . Component 1-3 InputsHdmi 1 DVI Analog AudioMonitorLink/RS-232C Control DTVLink/IEEESystem Reset Button Additional InformationDemo Track Connecting Audio cables Connecting External Devices and NetCommand SetupWall Outlet Cable Connecting a Wall Outlet Cable or Cable BoxStandard Cable Box Can be used with a CableCARDAntennas with Separate UHF and VHF Leads Antenna with a Single LeadFor antennas with flat twin leads For cable or antenna with coaxial lead$3CBDLQBOFM VCR to an Antenna or Wall Outlet Cable Audio & VideoVCR to a Cable Box Audio & Video Connecting a VCR to a Cable Box Audio & VideoReceiver Stereo System Satellite Receiver or Other Device with S-VideoTo connect an analog A/V receiver See Appendix a for component video signal DVD Player with Component VideoDVI Device Hdmi Device Hdtv Cable Box or Satellite Receiver with Component VideoMonitorLink Control/RS-232C Device Connecting a MonitorLink Control/RS-232C DeviceTJFEEFWJDFT Connecting the IR Emitter NetCommand-Pin-Style vs -Pin-Style Connectors Connecting Compatible Ieee 139 DevicesConnection Styles Direct Device-To-Device StyleDigital Video Signals When Connecting Ieee 139 DevicesDigital Audio Signals Digital Control SignalHelpful Hints for NetCommand Connections NetCommand Setup and Editing NetCommand Introduction NetCommand Pre-Memorized Devices Using the Remote Control with NetCommandReceiver Cable Box SAT Satellite DVD Player ReceiverNetCommand Setup On-Screen Buttons 3D Graphical Menu System Remote Control ButtonsNetCommand Initial Setup NetCommand Information ScreenWelcome Screen Device Setup Screen Setup Reminder NetCommand Initial Setup, Setup ReminderReview Screen Finish ScreenEdit NetCommand Adding an A/V Receiver Receiver ScreenReceiver Inputs Receiver AVR Learn Screen Receiver AVR Input Learn ScreenAudio Output to AVR Screen Name ScreenEdit NetCommand Adding Devices Edit NetCommand ScreenNew Device Screen Device Learn Screen Device ScreenConnection for Device Screen Device Advanced Learn ScreenVCR for Recordings Screen IR Code for Device ScreenRF Connection for Cable Screen Edit NetCommand Changing or Deleting Devices Change Device ScreenDelete Device Screen Ieee 1394 Devices and NetCommand Control Adding Ieee 1394 Devices Automatically Adding Ieee 1394 Devices AutomaticallyNew 1394 Device Screen Name for 1394 Device Screen Adding Ieee 139 Devices Automatically Ieee 139 Device Type ScreenConnection Screen Page NetCommand Functions PIP Device Selection Menu Device Selection MenuAudio Section Video SectionDevice Menu Using the Device Menu Button to Display MenusCableCARD Menu IR Controlled DevicesGuide and the Recording Setup Screen Using the Guide Button to Display ChannelView and MenusGuide Button Guide and the Device Selection MenuSetting up Recordings NetCommand-Controlled RecordingsTime-Delayed Recording Record ListTV Disc and A/V Disc Search by Time Direct VCR Recording from an Antenna or Cable SourceTV Disc and A/V Disc Track List Screen Copy-Protected MaterialUsing TV Disc and A/V Discs Using the Remote Control with TV Disc or an A/V DiscCopying or Moving TV Disc or A/V Disc Recordings Setting up a Non-Recording Peer-to- Peer Connection What is a Peer-to-Peer Connection?Cancelling a Peer-to-Peer Connection Peer-to-Peer ConnectionsTV Menu Operations Main Menu Language Setup MenuMemorize Channels ClockTimer Lamp ReminderSoftware Version Remote Control Transport Buttons NetCommand MenuEdit Icon OrderTV Pause Controlling TV Pause FeaturesTV Pause with TimeShuttle TimeShuttleTimeShuttle and TV Disc Recordings To Turn Off TimeShuttleTime-Delayed Recording Recording SetupRecord Menu RecordCancel Scheduled Recordings Default Digital Record DeviceTV Guide On Screen and the Record List Analog RecordingsChannel Menu SQV SuperQuickView Signal StrengthCaptions Menu Digital SettingsAnalog Captions BackgroundSize FontsColor Opacity FontSetting V-Chip Options Setting a Pass CodeChip Lock Menu Chip Lock Menu OverviewLock by Time V-CHIP ButtonFront Button Lock Bypassing V‑Chip Lock and Lock by TimeChip Signal Information Content CategoriesChip Ratings Audio/Video Menu Analog and Digital Audio Settings Audio SettingsAnalog-Only Audio Settings Digital-Only Audio SettingsVideo Settings Video SettingsPC Video Settings Page CableCARD MediaCommand and Memory Card PlaybackUsing a CableCARD CableCARDCableCARD Technology Memory Card Slots MediaCommand and Memory Card PlaybackMedia Setup Menu Media Command and Memory Card PlaybackFor Jpeg Picture Slide Show Setup For MP3 or WMA Audio Playlist SetupOperation of PIP and POP TV Display Formats Signal DefinitionsDVD Definitions Format Definitions57%JTQMBZ Analog Program On-Screen InformationDigital Program TV Disc or Digital Ieee 1394 DeviceUsing the TV with a PC Connecting a PC See Appendix a for signal compatibilityComputer with an Hdmi Monitor Output Computer with a DVI Monitor Output Computer with a 15-Pin Monitor OutputModels WD-62927 and WD-73927 Adjusting Image Resolution Adjusting Image ResolutionPC Display Formats Page Appendix a Specifications Appendix F Cleaning and ServiceAppendix J Troubleshooting Appendix a Specifications TV SpecificationsInputs Outputs Appendix B NetCommand Specialized Device Keys Bypassing the V-Chip Lock Appendix CBypassing the V-Chip Lock Deactivating the Front Button LockThis page intentionally blank Programming the Remote to Control NetCommand A/V Products Appendix D Remote Control Programming CodesReceivers Cable BoxesDVD Players Satellite Receivers/SAT/DTVVCRs Cable/SAT/DTV position TV positionVCR position DVD positionNetCommand Compatible Traditional Devices Analog Appendix E Device Control with NetCommandIeee 1394 Devices When an Ieee 1394 Device is Viewed or PlayedAppendix F Cleaning and Service Do not touch the glass parts of the lamp cartridge Appendix G Lamp Cartridge ReplacementWash Your Hands THOROUGHLY, AS this Lamp Contains Mercury See detail Appendix H Diamond Shield Removal and InstallationNotched edge Down Install TrimTV Screen Raised Lip ChannelStep Hook the top End over Raised lip Install the Diamond ShieldStep Hook the lower End over Raised lip Pry up from the notches at both endsAppendix I Recording and Viewing Combinations Analog VCR Connected to Audio and Video Record OutputsDigital VCR or A/V Disc Connected to IEEE-1394 Port Appendix J Troubleshooting Symptom RemarksGeneral TV Operation PIP Picture IndicatorsRecording SoundExcessive digital artifacts when viewing an Ieee TV Guide On Screen Trademark and License Information Mitsubishi TV Software 123 Mitsubishi DLP Projection Television Limited Warranty124 This Limited Warranty does not CoverIndex IndexIndex Page Website Mail MDEAservice@mdea.com
Related manuals
Manual 86 pages 7.9 Kb
Top Page Image Contents