OFA Kameleon wRF UG rev 3.fm Page 19 Monday, September 13, 2004 11:18 AM
USER’S GUIDE
7.If the code works, Press OK once. The two bottom IR segments will flash twice.
8.To exit programming, press HOME twice. The display returns to the last- selected device menu screen.
SEARCHING FOR YOUR CODE
If your device does not respond after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV:.
NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the device and insert the required media
1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly.
2.Press SEARCH once.The Search Codes programming screen appears:
3.Press a device key once (e.g., TV). The
selected device key animates.The device’s Main Menu screen appears with the HOME key still displayed.
4. Press POWER once to select it as the search test function.The Search Programming screen appears again.
NOTE: With POWER as the search test function, a “Power On” IR command is sent to the device each time a test code is sent.As a confirmation, the IR segments display an outgoing animation.
NOTE: If your device or its original remote control does not have a Power key, select a different test function in this step (e.g., CH+, VOL+, Play, etc.).
|
| 5. Aim the remote control at the device (e.g., TV) and press | one or more | |||||||
|
|
| times. Stop when a working code performs the test function selected in | |||||||
|
|
| step 4. If desired, use to try a previous code. |
|
|
|
| |||
|
|
| NOTE: In the search mode, the remote control sends IR codes from its |
|
|
| ||||
|
|
| library to the selected device, starting with the most popular code first. |
|
|
| ||||
|
| Searching For Your Code |
|
|
| 19 |
| |||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| ||