One for All URC-9964B00 manual Using the IR/RF Base Station, Setting UP the IR/RF Base Station

OFA Kameleon wRF UG rev 3.fm Page 24 Monday, September 13, 2004 11:18 AM

KAMELEON 8-DEVICE REMOTE WITH RF

6.To assign a mode to the Channel Controls group, press a device key once.Then the Menu Controls programming screen appears:

NOTE: If a device key is animated, it is assigned to this function group. To continue programming the Home Theater mode, you must select a device key, even if it is the same one that is currently animated.

7.To assign a mode to the Menu Controls group, press a device key once. Since

Home Theater programming is now complete, the Program Keys appear again.

8.To exit programming, press HOME

once.The display returns to the last- selected device menu screen.

USING THE IR/RF BASE STATION

The OFA Kameleon 8-Device Remote with RF (URC-9964B00) comes with an IR/RF Base Station which receives radio-frequency (RF) signals from the OFA Kameleon 8 Device Remote with RF, anywhere in your home, up to 100 feet away. Once it is set up, the IR/RF Base Station will convert the RF signals into Infrared (IR) signals to control your home theater devices.

NOTE: The OFA Kameleon 8-Device Remote with RF transmits both an IR and an RF signal simultaneously. It is your option whether you want to install the IR/RF Base Station for extended remote control range. If you choose to do so, during testing do not aim the OFA Kameleon 8-Device Remote with RF at your home entertainment devices to verify that RF transmission is working.

NOTE: The RF signal transmitted by the OFA Kameleon 8-Device Remote with RF, only works with the IR/RF Command Center.

SETTING UP THE IR/RF BASE STATION

1.Find a location approximately 8 feet in front of your home theater devices. It should provide (line-of-sight) access to your equipment and a power outlet to plug in the IR/RF Base Station.

24 Using the IR/RF Base Station