One for All URC-9964B00 manual Programming a Master Power Macro in the Home Theater Mode

Page 31

OFA Kameleon wRF UG rev 3.fm Page 31 Monday, September 13, 2004 11:18 AM

USERS GUIDE

5.To save the macro, press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear again.

6.Exit programming by pressing HOME once. The display returns to the last-selected device menu screen.

7.Now, if you aim the remote control at the devices selected in step 4 and press the programmed Macro Key once, the TV turns on and tunes to channel 3. Then the Cable Box turns on and tunes to channel 071.

PROGRAMMING A MASTER POWER MACRO IN THE HOME THEATER MODE

A macro can be programmed onto the POWER key to turn on or off as many as seven Home Theater devices.

NOTE: This following example assumes the Home Theater system contains a Satellite Receiver, a DVD Player, an Audio Receiver, and a TV.

1.Press and hold SETUP until the two bottom IR

segments flash twice. The Program Keys appear as SETUP flashes repeatedly.

2.Press MACRO once.The Macro programming screen appears:

3.Press POWER once.The last-selected

device menu screen, including HOME, appears.

4. Enter the macro sequence. For this example, press CBL/SAT once, followed by POWER once. Next, press DVD once, followed by POWER once.Then press AUDIO once, followed by POWER once. Finally, press TV once, followed by POWER once.

5.To save the power macro, press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear again.

6.Exit programming by pressing HOME once. The display returns to the last-selected device menu screen.

7.To test the power macro, first make sure all home theater devices selected in step 4 are turned on. Aim the remote control at the devices

 

Using Macros

31

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 31
Contents User’s Guide Kameleon 8-DEVICE Remote with RF Introduction Pressing any key turns on all keys and icons Installing BatteriesHOW Kameleon Works Features And Functions Features and FunctionsPress Mute once to turn the sound off or on KEY ChartsUse CH or CH to select the next higher or lower channel Device Cursor and OK KeysControl PVR/DVR video PVR mode, use the Live Transport Keys toUSER’S Guide Device KEY Controls These Devices Device TableAdjusting Brightness Adjusting the DisplayProgram Keys appear Adjusting The Display Adjusting HOW Long the Screen Light is onSeconds Press Other once.The Other programming screen appears Setting the Vibration SwitchUsing the Number Keys, enter 9 8 Programming Device ControlSelected device key animates SAT, CD, TV, DVD, AUDIO, VCR, or PVRProgramming Device Control Audio Code CBL/SAT Code Programming Combo Device Control One or more Searching for Your CodeIf desired, use to try a previous code Checking The Codes Using the Number Keys, enter 9 9Checking the Codes Bottom two IR segments flash twiceControl Organization Using the Home Theater ModePAGE-, MENU, INFO, GUIDE, Exit DVD Press and hold Setup until the two bottom IRUSER’S Guide Setting UP the IR/RF Base Station Using the IR/RF Base StationUsing the IR/RF Base Station Adding the IR Signal Extension Cord Power Cord Antenna IR LensDistance may vary Optimizing IR/RF Base Station Reception Changing Volume LockLocking Volume Control to ONE Mode Global Volume Lock Changing Volume LockIndividual Volume Unlock Unlocking ALL Volume Control Restoring Default Setting Using MacrosPressand holdSETUP until the two bottom IR Programming a Favorite Channel Macro Programming a Master Power Macro in the Home Theater Mode Learning Precautions Using LearningClearing a Macro Programming a Learning KEY Deleting a Single Learning KEY Deleting ALL Learned Keys in a Specific Mode Reassigning Device Keys Using KeymoverReassigning Device Keys Press VOL Programming KeymoverTwo bottom IR segments flash twice AppearsRestoring a Single Keymoved KEY Restoring ALL Keymoved Keys in a Single ModePerform steps 1 through 3 of Programming Keymover, above Programming Favorite Channel Scan Using Channel ScanRestoring Factory Default Settings Restoring Factory Default SettingsClearing ALL Custom Programming Manufacturer’s Codes Setup Codes for Audio AmplifiersSetup Codes for Audio Receivers MANUFACTURER’S CodesSetup Codes for CD Players Setup Codes for Cable BoxesNSM Setup Codes for DVD PlayersSetup Codes for Home Automation Setup Codes for DVD PlayerPlayers Codes Setup Codes for PvrsSKY Setup Codes for TVSJCB SVA Setup Codes for TV/DVD Player Combos DVD CodesSetup Codes for Vcrs Setup Codes for TV/VCR/DVD Player CombosHI-Q Consumer Help-Line 330 Setup Codes for Video AccessoriesSetup Codes for CABLE/DVR Combos About UpgradingUpgrade Exclusions Upgrade ProcedureTroubleshooting USER’S Guide Programming Main Menu Device Menu ScreensDevice Menu Screens Audio Surround Menu Audio Presets Menu AUX PVR/VOD M ENU CBL/SAT PVR/VOD M ENU DVD Main Menu PVR Main Menu TV M ENU VCR M ENU VCR Main MenuCustomer Support About Battery Life Battery USE and SafetyBattery Use And Safety Additional Information SpecificationsRemote Control Dimensions IR/RF Base Station Dimensions