One for All URC-9964B00 manual Programming a Learning KEY

Page 33

OFA Kameleon wRF UG rev 3.fm Page 33 Monday, September 13, 2004 11:18 AM

USERS GUIDE

Do not use the following keys for learning: Device Keys, M1~M4, SETUP, FAV, SCROLL, PRESET, PVR VOD, or Record (•) Key.

Learning capacity is approximately 50 to 75 keys, depending on the code being learned.

If both learned and keymoved functions are assigned to the same key, the last programmed function is stored.

A learned function cannot be used as a source for Keymover (see Using Keymover on page 36).

Certain device codes are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: . Please have your original remote controls handy before programming learning. Be sure to press each teaching key within 5 seconds of the previous entry. Otherwise, the OFA Kameleon 8-Device Remote with RF exits programming mode.

PROGRAMMING A LEARNING KEY

1.Press and hold SETUP until the two bottom IR

segments flash twice. The Program Keys appear as SETUP flashes repeatedly.

2.Press IR LRN once.The IR Learn programming screen appears:

3.Press a device key once (i.e., AUX, CBL/SAT,

CD, TV, DVD, AUDIO, VCR, or PVR) to assign a mode for learning.The selected device menu screen, including HOME, appears.

 

Using Learning

33

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 33
Contents User’s Guide Kameleon 8-DEVICE Remote with RF Introduction Pressing any key turns on all keys and icons Installing BatteriesHOW Kameleon Works Features And Functions Features and FunctionsPress Mute once to turn the sound off or on KEY ChartsUse CH or CH to select the next higher or lower channel Device Cursor and OK KeysControl PVR/DVR video PVR mode, use the Live Transport Keys toUSER’S Guide Device KEY Controls These Devices Device TableAdjusting the Display Adjusting BrightnessProgram Keys appear Adjusting HOW Long the Screen Light is on Adjusting The DisplaySeconds Using the Number Keys, enter 9 8 Setting the Vibration SwitchProgramming Device Control Press Other once.The Other programming screen appearsSAT, CD, TV, DVD, AUDIO, VCR, or PVR Selected device key animatesProgramming Device Control Audio Code CBL/SAT Code Programming Combo Device Control Searching for Your Code One or moreIf desired, use to try a previous code Checking the Codes Using the Number Keys, enter 9 9Bottom two IR segments flash twice Checking The CodesUsing the Home Theater Mode Control OrganizationPAGE-, MENU, INFO, GUIDE, Exit DVD Press and hold Setup until the two bottom IRUSER’S Guide Using the IR/RF Base Station Setting UP the IR/RF Base StationUsing the IR/RF Base Station Adding the IR Signal Extension Cord Power Cord Antenna IR LensDistance may vary Locking Volume Control to ONE Mode Global Volume Lock Changing Volume LockChanging Volume Lock Optimizing IR/RF Base Station ReceptionIndividual Volume Unlock Using Macros Unlocking ALL Volume Control Restoring Default SettingPressand holdSETUP until the two bottom IR Programming a Favorite Channel Macro Programming a Master Power Macro in the Home Theater Mode Using Learning Learning PrecautionsClearing a Macro Programming a Learning KEY Deleting a Single Learning KEY Deleting ALL Learned Keys in a Specific Mode Using Keymover Reassigning Device KeysReassigning Device Keys Two bottom IR segments flash twice Programming KeymoverAppears Press VOLRestoring ALL Keymoved Keys in a Single Mode Restoring a Single Keymoved KEYPerform steps 1 through 3 of Programming Keymover, above Programming Favorite Channel Scan Using Channel ScanRestoring Factory Default Settings Restoring Factory Default SettingsClearing ALL Custom Programming Setup Codes for Audio Receivers Setup Codes for Audio AmplifiersMANUFACTURER’S Codes Manufacturer’s CodesSetup Codes for CD Players Setup Codes for Cable BoxesNSM Setup Codes for DVD PlayersSetup Codes for Home Automation Setup Codes for DVD PlayerPlayers Codes Setup Codes for PvrsSKY Setup Codes for TVSJCB SVA Setup Codes for TV/DVD Player Combos DVD CodesSetup Codes for Vcrs Setup Codes for TV/VCR/DVD Player CombosHI-Q Setup Codes for CABLE/DVR Combos Setup Codes for Video AccessoriesAbout Upgrading Consumer Help-Line 330Upgrade Exclusions Upgrade ProcedureTroubleshooting USER’S Guide Device Menu Screens Programming Main MenuDevice Menu Screens Audio Surround Menu Audio Presets Menu AUX PVR/VOD M ENU CBL/SAT PVR/VOD M ENU DVD Main Menu PVR Main Menu TV M ENU VCR M ENU VCR Main MenuCustomer Support Battery USE and Safety About Battery LifeBattery Use And Safety Remote Control Dimensions SpecificationsIR/RF Base Station Dimensions Additional Information