One for All URC-9964B00 manual Deleting a Single Learning KEY

OFA Kameleon wRF UG rev 3.fm Page 34 Monday, September 13, 2004 11:18 AM

KAMELEON 8-DEVICE REMOTE WITH RF

4.Place the OFA Kameleon 8-Device Remote with RF head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that will serve as the teaching function.

2"

5.On the OFA Kameleon 8-Device Remote with RF, select and press a key where the learned function will be stored.The IR segments display an incoming animation, continue for three revolutions, and then the entire display turns off.

After the display is off, press and hold the teaching key (on your original remote control) until the display (on the OFA Kameleon 8-Device Remote) turns on again.The two bottom IR segments flash twice when the code is successfully captured.

NOTE: If the two bottom IR segments display one long flash, a learning error has occurred.Try repeating this step again until a successful capture occurs. If the function is still not captured, press HOME twice to exit programming and review the “Learning Precautions” on the previous page. If needed, also see “Troubleshooting” on page 54.After review, start programming again at step 1.

6.To learn other functions, repeat steps 3 through 5 as desired.

7.To exit programming, press HOME twice. The display returns to the last- selected device menu screen.

DELETING A SINGLE LEARNING KEY

1.Press and hold SETUP until the two bottom IR

segments flash twice. The Program Keys appear as SETUP flashes repeatedly.

34 Using Learning