One for All URC-9964B00 manual USER’S Guide

OFA Kameleon wRF UG rev 3.fm Page 55 Monday, September 13, 2004 11:18 AM

	USER’S GUIDE
PROBLEM:	Favorite channel function does not work properly.
SOLUTION:	Some devices (e.g.,Cable Boxes or Satellite Receivers) use
	two-digit channel numbers. During programming, press
	ENTER or OK once after entering a channel number (e.g., 0 2
	ENTER for channel 2). See Programming Favorite Channel
	Scan on page 39.
PROBLEM:	Changing channels does not work properly.
SOLUTION:	If the original remote control required pressing ENTER to
	change channels, then press ENTER on the remote control
	after entering channel numbers.
PROBLEM:	No remote control of volume.
SOLUTION:	See Changing Volume Lock on page 27 to lock/unlock
	volume.
PROBLEM:	Two bottom IR segments flash when a key is pressed, but
	home entertainment device does not respond.
SOLUTION:	Make sure the remote control is aimed at your home
	entertainment device and is not farther than 15 feet away.
PROBLEM:	CH and CH do not work for your RCA TV.
SOLUTION:	Due to RCA design (1983-1987), only the original remote
	control will operate these functions.
PROBLEM:	Pressing SCROLL one or times in CD, DVD, PVR or Home
	Theater mode, does not display a secondary menu screen.
SOLUTION:	Even though SCROLL is displayed, for these modes, there are
	no additional menu screens.
PROBLEM:	Cannot program my combo device code.
SOLUTION:	Make￿sure have￿selected the correct device key for your
	combo code.

Troubleshooting 55