One for All URC-9964B00 manual Using the Home Theater Mode, Control Organization

Page 21

OFA Kameleon wRF UG rev 3.fm Page 21 Monday, September 13, 2004 11:18 AM

USERS GUIDE

NOTE: If you enter an invalid number (e.g., 7) or key (e.g., Play), the two bottom IR segments display one long flash and return to the “Other” programming screen. Start again with step 2 above.

7.To check for codes of other devices, repeat steps 4 to 6, but substitute the appropriate device key for each device you are checking. Write down the device’s code digits in the appropriate code boxes on page 17.

8.To exit programming, press HOME twice. The display returns to the last- selected device menu screen.

USING THE HOME THEATER MODE

The OFA Kameleon 8-Device Remote with RF includes a custom Home Theater mode.After the Home Theater key is programmed, it allows you to access four groups of remote control keys without having to change device modes.

CONTROL ORGANIZATION

For Home Theater programming, the remote control’s keys are grouped by type of control into the following four control groups:

Video Playback: Transport Controls (Rewind, Play, Fast Forward, Stop,

Pause, Record, Skip Forward, Skip Back), and LIVE TV

Volume Controls: VOL+, VOL-,and MUTE

Channel Controls: CH+, CH-, INPUT, Keypad (0 - 9), FAV, ENTER, LAST

Menu Controls: Cursor Controls (Up, Down, Left, Right), OK, PAGE+,

PAGE-, MENU, INFO, GUIDE, EXIT

Moreover, the above Control Groups can be used in the following modes:

Video Playback: AUDIO, AUX, CBL/SAT, CD, DVD, PVR, VCR

Volume Controls: AUDIO, AUX, CBL/SAT, CD, DVD, PVR, TV, VCR

Channel Controls: AUX, CBL/SAT, DVD, PVR, TV, and VCR

Menu Controls: AUDIO, AUX, CBL/SAT, CD, DVD, PVR, TV, and VCR

 

Using The Home Theater Mode

21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 21
Contents User’s Guide Kameleon 8-DEVICE Remote with RF Introduction Pressing any key turns on all keys and icons Installing BatteriesHOW Kameleon Works Features And Functions Features and FunctionsPress Mute once to turn the sound off or on KEY ChartsUse CH or CH to select the next higher or lower channel Device Cursor and OK KeysControl PVR/DVR video PVR mode, use the Live Transport Keys toUSER’S Guide Device KEY Controls These Devices Device TableAdjusting the Display Adjusting BrightnessProgram Keys appear Adjusting HOW Long the Screen Light is on Adjusting The DisplaySeconds Using the Number Keys, enter 9 8 Setting the Vibration SwitchProgramming Device Control Press Other once.The Other programming screen appearsSAT, CD, TV, DVD, AUDIO, VCR, or PVR Selected device key animatesProgramming Device Control Audio Code CBL/SAT Code Programming Combo Device Control Searching for Your Code One or moreIf desired, use to try a previous code Checking the Codes Using the Number Keys, enter 9 9Bottom two IR segments flash twice Checking The CodesUsing the Home Theater Mode Control OrganizationPAGE-, MENU, INFO, GUIDE, Exit DVD Press and hold Setup until the two bottom IRUSER’S Guide Using the IR/RF Base Station Setting UP the IR/RF Base StationUsing the IR/RF Base Station Adding the IR Signal Extension Cord Power Cord Antenna IR LensDistance may vary Locking Volume Control to ONE Mode Global Volume Lock Changing Volume LockChanging Volume Lock Optimizing IR/RF Base Station ReceptionIndividual Volume Unlock Using Macros Unlocking ALL Volume Control Restoring Default SettingPressand holdSETUP until the two bottom IR Programming a Favorite Channel Macro Programming a Master Power Macro in the Home Theater Mode Using Learning Learning PrecautionsClearing a Macro Programming a Learning KEY Deleting a Single Learning KEY Deleting ALL Learned Keys in a Specific Mode Using Keymover Reassigning Device KeysReassigning Device Keys Two bottom IR segments flash twice Programming KeymoverAppears Press VOLRestoring ALL Keymoved Keys in a Single Mode Restoring a Single Keymoved KEYPerform steps 1 through 3 of Programming Keymover, above Programming Favorite Channel Scan Using Channel ScanRestoring Factory Default Settings Restoring Factory Default SettingsClearing ALL Custom Programming Setup Codes for Audio Receivers Setup Codes for Audio AmplifiersMANUFACTURER’S Codes Manufacturer’s CodesSetup Codes for CD Players Setup Codes for Cable BoxesNSM Setup Codes for DVD PlayersSetup Codes for Home Automation Setup Codes for DVD PlayerPlayers Codes Setup Codes for PvrsSKY Setup Codes for TVSJCB SVA Setup Codes for TV/DVD Player Combos DVD CodesSetup Codes for Vcrs Setup Codes for TV/VCR/DVD Player CombosHI-Q Setup Codes for CABLE/DVR Combos Setup Codes for Video AccessoriesAbout Upgrading Consumer Help-Line 330Upgrade Exclusions Upgrade ProcedureTroubleshooting USER’S Guide Device Menu Screens Programming Main MenuDevice Menu Screens Audio Surround Menu Audio Presets Menu AUX PVR/VOD M ENU CBL/SAT PVR/VOD M ENU DVD Main Menu PVR Main Menu TV M ENU VCR M ENU VCR Main MenuCustomer Support Battery USE and Safety About Battery LifeBattery Use And Safety Remote Control Dimensions SpecificationsIR/RF Base Station Dimensions Additional Information