3M 78-8135-4385-3-A manual Caution

Page 13

12.2Maintaining ﬁber position in connector, push the jacketed ﬁber into the cable v-slot feature on the load adapter until secure.

12.3Attempt to line up the holder arm to keep cable as straight as possible.

12.4Remove the load adapter from the oven by grasping the cool-touch handle.

CAUTION

Do not touch the metal portion of the load adapter or connector, as it will be hot!

12.5Rest the load adapter in one of the available cooling ports located on both sides of the oven. Let cool for a minimum of 3 minutes.

78-8135-4385-3-A

13

Image 13

Contents LC Hot Melt Fiber Optic Connectors Contents Hot Melt Oven Safety Information Safety and Helpful Hints3M LC Expansion 6650-LC Kit Contents C D 3M LC ConnectorsC D E Setup78-8135-4385-3-A 1.6 2.0 mm Jacketed Cable Connector Preparation 900 micron Cable Connector Preparation3.0 mm Jacketed Cable Connector Preparation Stripping Procedure for 1.6 2.0 mm Jacketed Fiber Strip Guide Stripping Procedure for 900 micron Fiber78-8135-4385-3-A Stripping Procedure for 3 mm Jacketed Fiber Connector Mounting CAUTION Crimping and Boot Placement for 1.6 2.0 mm Jacketed Fiber Boot Placement for 900 micron Fiber78-8135-4385-3-A Crimping and Boot Placement for 3 mm Jacketed Fiber Scribing Multimode Polish 78-8135-4385-3-A 78-8135-4385-3-A Singlemode Polish to -40db 78-8135-4385-3-A Singlemode Polish to -55db Finishing Installing Duplex Yokes78-8135-4385-3-A 80-6113-1355-4 22.0 3M Expansion Kit 6650-LC and Replacement Part Numbers78-8135-4385-3-A Communication Markets Division 3M Telecommunications