3M 78-8135-4385-3-A micron Cable Connector Preparation, mm Jacketed Cable Connector Preparation

Page 8

5.0900 micron Cable Connector Preparation

5.1Place strain relief boot on cable as shown.

6.01.6 – 2.0 mm Jacketed Cable Connector Preparation

6.1Place the strain relief boot ﬁrst and then the heat

shrink crimp sleeve on the cable as shown.

7.03.0 mm Jacketed Cable Connector Preparation

7.1Place the strain relief boot ﬁrst and then the metal

crimp sleeve on the cable as shown.

8	78-8135-4385-3-A

Image 8

Contents LC Hot Melt Fiber Optic Connectors Contents Safety and Helpful Hints Hot Melt Oven Safety Information3M LC Expansion 6650-LC Kit Contents 3M LC Connectors C DSetup C D E78-8135-4385-3-A 3.0 mm Jacketed Cable Connector Preparation 900 micron Cable Connector Preparation1.6 2.0 mm Jacketed Cable Connector Preparation Strip Guide Stripping Procedure for 900 micron Fiber Stripping Procedure for 1.6 2.0 mm Jacketed Fiber78-8135-4385-3-A Stripping Procedure for 3 mm Jacketed Fiber Connector Mounting CAUTION Boot Placement for 900 micron Fiber Crimping and Boot Placement for 1.6 2.0 mm Jacketed Fiber78-8135-4385-3-A Crimping and Boot Placement for 3 mm Jacketed Fiber Scribing Multimode Polish 78-8135-4385-3-A 78-8135-4385-3-A Singlemode Polish to -40db 78-8135-4385-3-A Singlemode Polish to -55db Installing Duplex Yokes Finishing78-8135-4385-3-A 22.0 3M Expansion Kit 6650-LC and Replacement Part Numbers 80-6113-1355-478-8135-4385-3-A Communication Markets Division 3M Telecommunications