19.0 Singlemode Polish to –55db
Note: Complete steps 17.0 through 17.13 of the multimode polish and 18.0 through 18.11 of the singlemode polish before proceeding further.
19.1Place several drops of alcohol on to the second gray rectangular rubber pad.
19.2Before the alcohol evaporates, place a sheet of the white frosted final lapping film on the polishing pad, shiny side down.
19.3Clean the lapping film with a
IMPORTANT: Do not clean the white frosted lapping film with alcohol. Use only distilled water.
Note: The frosted final lapping film can be used for up to 5 connectors.
19.4Place several drops of distilled water onto the frosted lapping film.
19.5Clean the flat side of the polishing jig with a
19.6Place the polishing jig assembly on the wet frosted lapping film. Perform 4 figure eights on the wet frosted lapping film.
| 23 |