Contents |
| |
1.0 | Safety and Helpful Hints | 3 |
| Hot Melt Oven Safety Information | 3 |
2.0 | 3M™ LC Expansion | 4 |
3.0 | 3M™ LC Connectors | 5 |
4.0 | Setup | 6 |
5.0 | 900 micron Cable Connector Preparation | 8 |
6.0 | 1.6 – 2.0 mm Jacketed Cable Connector Preparation | 8 |
7.0 | 3.0 mm Jacketed Cable Connector Preparation | 8 |
8.0 | Strip Guide | 9 |
9.0 | Stripping Procedure for 900 micron Fiber | 9 |
10.0 | Stripping Procedure for 1.6 – 2.0 mm Jacketed Fiber | 9 |
11.0 | Stripping Procedure for 3 mm Jacketed Fiber | 11 |
12.0 | Connector Mounting | 12 |
13.0 | Boot Placement for 900 micron Fiber | 14 |
14.0 | Crimping and Boot Placement for 1.6 – 2.0 mm Jacketed Fiber | 14 |
15.0 | Crimping and Boot Placement for 3 mm Jacketed Fiber | 16 |
16.0 | Scribing | 17 |
17.0 | Multimode Polish | 18 |
18.0 | Singlemode Polish to | 21 |
19.0 | Singlemode Polish to | 23 |
20.0 | Finishing | 24 |
21.0 | Installing Duplex Yokes | 24 |
22.0 | 3M™ Expansion Kit | 26 |
2 |