3M 78-8135-4385-3-A manual Strip Guide Stripping Procedure for 900 micron Fiber

8.0 Strip Guide

9.0Stripping Procedure for 900 micron Fiber

9.1Place the cable on the strip template. Mark buffer

at 11 mm. Using the 3M™ Stripping Tool 6365-ST, remove the buffer in small increments until 11 mm of buffer has been removed.

9.2Using a lint-free cloth moistened with isopropyl alcohol, clean the bare fiber to remove any oils or acrylate coating debris.

9.3Check the final strip length and adjust if necessary.

10.0Stripping Procedure for 1.6 – 2.0 mm Jacketed Fiber

10.1Place the jacketed fiber on the strip template and use

a fiber marking pen to mark the location of the jacket cut. Using the 3M™ Stripping Tool 6365-ST, remove 33 mm (1 1/3") of jacket off cable.

��������������

�������������

�����

������

78-8135-4385-3-A 9