Bosch Appliances DVR 480, DVR 440 operation manual Viewing pictures, Monitor a, Monitor B

Digital Video Recorder 440/480 SeriesOperating instructions en 33

5.4	Viewing pictures
	The unit has two monitor outputs, A and B. The way in which these monitors display pictures
	depends on how the system is configured.
5.4.1	Monitor A
	Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback
	camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
	on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
	is the default monitor for keyboard and mouse commands.
	Changing the full-screen display on Monitor A
	To control the display on monitor A with mouse control:
	1. Display the System Control Bar.
	2.	Click	.
	3.	From the pop-up menu, select the display for Monitor A
		– Select 1-4/8 for the corresponding Camera
		– Select the sequence		key to sequence channels 1-4/8

Changing the quad/3x3 display on Monitor A

	To control the quad/3x3 display on monitor A with mouse control:
	1.	Display the System Control Bar.
	2.	Click		.
	3.	From the pop-up menu, select the display for Monitor A
		– Select the quad key			to select the quad mode
		– Select the multiscreen key				to select the 3x3 mode (DVR 480 only)
		–	Select the sequence		key to sequence the quad mode
5.4.2	Monitor B
	Monitor B displays full-screen, quad or multiscreen (with or without sequence) of live
	pictures. When an alarm or motion input is detected, the camera picture with the Alarm/
	Motion indicator can be displayed on monitor B. When multiple alarms or motion occur,
	camera pictures are sequenced on monitor B.
	Changing the full-screen display on Monitor B
	To control the display on monitor B with mouse control:
	1.	Bring up the System Control Bar.
	2.	Click the Monitor B			button.
	3.	From the pop-up menu, select the display for Monitor B
		– Select 1-8/16 for the corresponding Camera
		–	Select the sequence		key to sequence channels 1-8/16

Changing the quad display on Monitor B

To control the quad display on monitor B with mouse control:

1.Bring up the System Control Bar.

2.Click the Monitor B button.

Bosch Security Systems Installation and Operation manual AM18-Q0605 v2.0 2012.04