Bosch Appliances DVR 440 Quick install, Connections, Primary connections, Optional connections

Page 16

16 en Quick installDigital Video Recorder 440/480 Series

3

Quick install

To get the unit quickly operational, make the connections described below and then enter the

relevant data in the Quick install menu. The Quick install menu appears the first time the unit

is started.

3.1

Connections

Figure 3.1 Back panel connections for the 4-channel model*

* 8-channel models have 8 video connectors and 2 alarm input connectors.

3.1.1	Primary connections
	1.	Connect the cameras to the VIDEO IN BNC connectors.
	2.	Connect monitor A to the VGA MON A output (supporting 800x600, 1024x768, or
		1280x1024).
	3.	Connect a USB mouse to the USB port.

3.1.2	Optional connections
	1.	Connect monitor B to the C MON B BNC connector.
	2.	Connect an audio signal to the AUDIO IN RCA (CINCH) input.
	3.	Connect the AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.
	4.	Connect up to 4/8 alarms to the ALARM IN inputs (via the supplied terminal blocks).
	5.	Connect the ALARM OUT output (via the supplied terminal blocks).
	6.	Connect a pan/tilt/zoom control unit to the RS-485port (via the supplied terminal block).
	7.	Connect to your network via the RJ-45Ethernet port.
	8.	Connect a “Bosch RS232 to Bi-phase converter” to the RS-232port if required.

3.1.3	Powering up
	Switch on all connected equipment.
	–	Connect the power unit to the AC power outlet.
	–	Connect the DC power cord to the 12VDC connector on the unit.

AM18-Q0605 v2.0 2012.04

Installation and Operation manual

Bosch Security Systems

Image 16

Contents Digital Video Recorder 440/480 Series Page Table of Contents Maintenance Configuration menuCamera Maximum frame rates DVR Video adjustment Operating instructionsTCP/IP DdnsNTP Web Client SoftwareMenu default values Technical specifications AppendixSafety precautions 1SafetyImportant safety instructions En Safety Digital Video Recorder 440/480 Series Important Notices Coax groundingRack-mount FCC and UL FCC InformationBosch notices CopyrightTrademarks More informationIntroduction Digital video recorder applicationsVersions ManualsPackage contents FeaturesUnpacking 5Warranty Installation environmentAssociated equipment Quick install Powering upConnections Primary connectionsFirst-time use NavigatingQuick install menu InternationalQuick install Continuous Recording Continuous RecordingIP address, Subnet 3NetworkMask, and Gateway Hardware setup SpecificationsCamera connections Audio connectionsMonitors or larger when using LCDs Monitor connectionsVGA Monitor a 2CVBSSignal name Pin number Description 4RS-232 COM port connectionsRTS CTSLantx 5Ethernet connectionLanrx + RS485 port 6USB connectorsGND Connecting the inputs 8External alarm I/O connectionConnecting the alarm output 9Power supply 10MaintenanceView live Yes Sequence Quad Operating instructionsOSD 1Keys Front panel controlsArrow keys AM18-Q0605 v2.0 Bosch Security Systems 2Indicators Mouse Controls Remote controlKey. To close the System Control Bar press the exit Monitor a Viewing picturesMonitor B 3Viewing Freeze image ZoomLive mode Playback modeAdministrator. To enter playback mode To switch the unit from live to playback modeAccess using the front panel keys Access using the mouseOverview of the menu system System Control Bar appears on monitor aMain menu 7Search Main menu Search Bosch Security Systems AM18-Q0605 v2.0Date/time search Event search Search criteriaSearch results Event Search resultsSmart search Smart Search results8Export 10 Export menuSystem information 11 System Control Bar System information12 System Control Bar Video signals information 13 System Control Bar Disk info 10Log Logbook filterTriggers and alarms Alarm inputsMultiple alarms Video loss alarmMotion events Configuration menu System Configuration menuTop tabs Submenus Camera 1Camera 1CameraVideo adjustment Channels EnabledMaximum frame rates DVR Channel5PTZ Camera PTZCamera Continuous Recording Use the same procedure as in Continuous Recording Input RecordingPre-event Post-eventUse the same procedure as in Input Recording Motion RecordingNetwork Live Streaming 25/30Video format Camera Video format2Schedule Setting the dynamic characteristics1Schedule Use the same procedure as Monitor a 3Display1Language Exception days4Event 1InputInput Type Relay output2Motion 13 Event MotionAlarm acknowledge 14 Event Alarm acknowledgeRelay outputs can be configured to react to system events System menu1TCP/IP 5Network2Streaming to mobile devices 3Connecting using a smart mobile phone 4DDNS 5Notification6Mail 6System 1Date/Time2NTP 3BeeperAdmin 4UsersGeneral User 1, 25Configuration 23 System ConfigurationHard Disk 24 System Hard disk7System 25 System SystemConnecting to the DVR 400 Series the first time Web Client SoftwareGetting started System requirementsHow to log on Settings behave differently because of the Web BrowserMenu structure differences Maximum number of usersLive mode Introducing the browser windowPTZ camera control Pan and tiltAux commands Camera viewsZoom, focus, and iris Pre-positionPlayback mode Web Client Playback Bosch Security Systems AM18-Q0605 v2.0Export mode Web Client Export AM18-Q0605 v2.0 Bosch Security SystemsConfiguration mode Installation Archive PlayerStarting the Program Authenticity of the archived videoTo switch the display mode Introducing the main windowCamera Views Open buttonViewing Images Using the playback controlsAssigning Cameos Find image Video slider barChecking authenticity Exit buttonMenu default values Navigation Setting Default value ResetNavigation Setting Default value Reset TCP/IP Dhcp Rtsp PortIcmp EmptyYYYY/MM/DD AdministratorDVR ID Technical specifications 10.1 Electrical10.1.1 Mechanical 10.1.2 EnvironmentalStorage Display ModesElectromagnetic and Safety 10.2 USB memory sticksEMC requirements USAAppendix Software licensesBosch software Other licenses copyright noticesWarranties and disclaimer of warranties Source licenseRelevant open source software can be found at InformationPage Bosch Security Systems