Bosch Appliances DVR 440, DVR 480 operation manual 4Event, 1Input, Input Type, Relay output

62 en Configuration menu Digital Video Recorder 440/480 Series

6.4Event

Use the Event menu to specify the desired behavior for an Input, detected Motion, or System failures; also define how alarms are acknowledged.

6.4.1Input

Figure 6.12 Event - Input

Inputs are always active on the unit.

Input Type

The Event behavior can be configured independantly for each channel.

–N.O. - Normally Open causes an alarm to tigger only when the circuit closes

–N.C. - Normally Closed causes an alarm to tigger only when the circuit is opened

Camera

Set the camera between 1 and 4, which is set to an alarm based on the input.

Relay output

Select the relay to trigger in response to the input.

PTZ

–For the camera associated with the input, a PTZ preset can be sent to the camera to move to a specified pre-position.

–Enter a pre-position number from 1-255for each of the PTZ cameras that should be moved.

AM18-Q0605 v2.0 2012.04 Installation and Operation manual Bosch Security Systems