Bosch Appliances DVR 440, DVR 480 operation manual 5Network, 1TCP/IP, 2Streaming to mobile devices

Page 66

66 en Configuration menu	Digital Video Recorder 440/480 Series

6.5Network

6.5.1TCP/IP

Figure 6.16 Network - TCP/IP

1.Enable DHCP to have the IP address, subnet mask, and default gateway assigned automatically by the network server.

–If DHCP is disabled, fill in the IP address, the Subnet mask, the default Gateway, and the Primary DNS server address. If required, change the default HTTP port no. (80) to a new value.

2.Restrict the network Bandwidth limit by entering a value between 256 Kbps and

100 Mbps. If 256 or 512_Kbps is selected, the DVR automatically selects I-frame only video at 1 IPS for transmission over the low bandwidth network connection.

(A video clip is not attached to an e-mail if 256 or 512_Kbps is selected.)

3.Enable the RTSP server to stream live video (for example, to a smart phone). If RTSP is enabled (on), enter a TCP/IP port number (default port 554).

4.ICMP is set to Off by default (ping is not available). Set ICMP to On if you are using Control Center software version 3.34 or lower).

6.5.2Streaming to mobile devices

The Real Time Streaming Protocol (RTSP) feature allows live video streaming over the network.

Attention:

If you enable this feature (RTSP server to On) and the firewall on a ADSL router is opened, anybody can view the cameras. There is no log-on user ID or password to protect a camera live image.

AM18-Q0605 v2.0 2012.04

Installation and Operation manual

Bosch Security Systems

Image 66

Contents Digital Video Recorder 440/480 Series Page Table of Contents Camera Maximum frame rates DVR Video adjustment MaintenanceConfiguration menu Operating instructionsNTP TCP/IPDdns Web Client SoftwareMenu default values Technical specifications Appendix1Safety Safety precautionsImportant safety instructions En Safety Digital Video Recorder 440/480 Series Important Notices Coax groundingRack-mount FCC and UL FCC InformationTrademarks Bosch noticesCopyright More informationVersions IntroductionDigital video recorder applications ManualsFeatures Package contentsUnpacking Installation environment 5WarrantyAssociated equipment Connections Quick installPowering up Primary connectionsFirst-time use NavigatingQuick install menu InternationalQuick install Continuous Recording Continuous Recording3Network IP address, SubnetMask, and Gateway Camera connections Hardware setupSpecifications Audio connectionsVGA Monitor a Monitors or larger when using LCDsMonitor connections 2CVBSRTS Signal name Pin number Description4RS-232 COM port connections CTS5Ethernet connection LantxLanrx + 6USB connectors RS485 portGND 8External alarm I/O connection Connecting the inputsConnecting the alarm output 9Power supply 10MaintenanceOperating instructions View live Yes Sequence QuadOSD Front panel controls 1KeysArrow keys AM18-Q0605 v2.0 Bosch Security Systems 2Indicators Remote control Mouse ControlsKey. To close the System Control Bar press the exit Viewing pictures Monitor aMonitor B 3Viewing Freeze image ZoomAdministrator. To enter playback mode Live modePlayback mode To switch the unit from live to playback modeOverview of the menu system Access using the front panel keysAccess using the mouse System Control Bar appears on monitor aMain menu 7Search Main menu Search Bosch Security Systems AM18-Q0605 v2.0Date/time search Search results Event searchSearch criteria Event Search resultsSmart search Smart Search results8Export 10 Export menuSystem information 11 System Control Bar System information12 System Control Bar Video signals information 13 System Control Bar Disk info 10Log Logbook filterTriggers and alarms Alarm inputsVideo loss alarm Multiple alarmsMotion events Configuration menu System Configuration menuTop tabs Submenus Camera 1Camera 1CameraMaximum frame rates DVR Video adjustmentChannels Enabled Channel5PTZ Camera PTZCamera Continuous Recording Pre-event Use the same procedure as in Continuous RecordingInput Recording Post-eventUse the same procedure as in Input Recording Motion RecordingNetwork Live Streaming 25/30Video format Camera Video formatSetting the dynamic characteristics 2Schedule1Schedule 1Language Use the same procedure as Monitor a3Display Exception daysInput Type 4Event1Input Relay output2Motion 13 Event MotionAlarm acknowledge 14 Event Alarm acknowledgeRelay outputs can be configured to react to system events System menu5Network 1TCP/IP2Streaming to mobile devices 3Connecting using a smart mobile phone 4DDNS 5Notification6Mail 2NTP 6System1Date/Time 3BeeperGeneral Admin4Users User 1, 25Configuration 23 System ConfigurationHard Disk 24 System Hard disk7System 25 System SystemGetting started Connecting to the DVR 400 Series the first timeWeb Client Software System requirementsMenu structure differences How to log onSettings behave differently because of the Web Browser Maximum number of usersPTZ camera control Live modeIntroducing the browser window Pan and tiltZoom, focus, and iris Aux commandsCamera views Pre-positionPlayback mode Web Client Playback Bosch Security Systems AM18-Q0605 v2.0Export mode Web Client Export AM18-Q0605 v2.0 Bosch Security SystemsConfiguration mode Starting the Program InstallationArchive Player Authenticity of the archived videoCamera Views To switch the display modeIntroducing the main window Open buttonUsing the playback controls Viewing ImagesAssigning Cameos Checking authenticity Find imageVideo slider bar Exit buttonMenu default values Navigation Setting Default value ResetNavigation Setting Default value Reset Icmp TCP/IP DhcpRtsp Port EmptyAdministrator YYYY/MM/DDDVR ID Technical specifications 10.1 ElectricalStorage 10.1.1 Mechanical10.1.2 Environmental Display ModesEMC requirements Electromagnetic and Safety10.2 USB memory sticks USABosch software AppendixSoftware licenses Other licenses copyright noticesRelevant open source software can be found at Warranties and disclaimer of warrantiesSource license InformationPage Bosch Security Systems