Bosch Appliances DVR 480 Find image, Video slider bar, Checking authenticity, Exit button

Digital Video Recorder 440/480 SeriesArchive Player en 85

8.5.1	Capturing a still image
	Capture still images from the full screen display of a camera and save them to the PC hard
	disk in a bitmap format.
	To save an image from the active cameo to the PC hard disk:
	1.	Click the Capture	button;
		– The Snapshot pop-up window appears.
	2.	To change the default location, browse to the location in the PC file system where the
		image file is to be stored.
	3.	Type a new name for the file to change the file name.
	4.	Click Save.

Authentication information is shown under the image.

8.6 Find image

Figure 8.4 Archive Player - date and time fields and Go button

1.Fill in a date and time.

2.Click the Go button;

– Playback starts at the specified date and time.

8.7	Video slider bar
	The video slider bar shows the relative playback time within the video interval and allows its
	adjustment.
8.8	Checking authenticity
	1. Click the Check		button to verify the authenticity of the archive:
	– A progress bar will be displayed if the check takes some time.
	– An information window indicates the authenticity of the archive.
	Verifying individual frames
	For authenticity verification of individual frames, pause playback and then click the
	information	button. This opens the Authenticity information window. This window shows
	details of the video frame shown in the cameo when it was clicked.
8.9	Exit button
	Click the Exit		button to stop using the Archive Player.

Bosch Security Systems Installation and Operation manual AM18-Q0605 v2.0 2012.04